Double Seal Quick Connector for ASIC Miner Water Cooling Tubes
Couldn't load pickup availability
Have questions about this product? Our team is here to help — just reach out on WhatsApp.
💬 Contact Us on WhatsAppAbout the Product
Double-Seal Quick Connector | ASIC Miner Water Cooling Tube Coupling
The double-seal quick connector is a brass-bodied quick-disconnect coupling designed for ASIC miner water cooling systems — Whatsminer hydro-cooled M-series, Antminer hydro variants, and any custom mining water loop using standard 12-13mm OD tubing. The double-seal architecture uses two independent O-rings rather than the single-seal common on cheap couplings, providing redundancy against drip leaks when connectors are repeatedly mated and disconnected during maintenance cycles.
The connector is compatible with Lian Li radiator and fan pipe assemblies, and uses standard threaded pagoda (barb) fittings on the tube side — making it a drop-in upgrade or replacement for the OEM couplings found on ASIC miner hydro loops. The brass body offers better corrosion resistance and pressure handling than the plastic quick-disconnects sometimes used in PC water cooling, and the brass-to-brass threaded joint at the fitting end stays tight under thermal cycling without backing off.
When to Use Double-Seal Quick Connectors
- Hydro-cooled ASIC miner maintenance — disconnect hashboard or radiator without draining the entire loop.
- Custom mining water loops — modular tube routing with serviceable disconnect points.
- Field replacement of leaking single-seal couplings — upgrade to dual-seal for long-term reliability.
- Lian Li radiator integration — direct mate with Lian Li-standard pipe thread profiles.
- Pressure-tested mining farms — dual-seal redundancy reduces failure rate at coupling points.
Specs and Construction
- Double-seal design — two independent O-rings for leak redundancy.
- Brass body — corrosion-resistant, higher pressure handling than plastic equivalents.
- Threaded pagoda (barb) fittings on the tube side — secure tube grip with cable-tie or hose clamp.
- Quick-disconnect mechanism — push-button release, single-handed operation.
- Lian Li radiator and fan pipe compatible — standard pipe thread profile.
- Self-sealing on disconnect — minimal coolant loss when uncoupling under pressure.
Double-Seal Quick Connector Specifications
| Feature | Specification |
|---|---|
| Body Material | Brass |
| Seal Material | EPDM O-rings (dual seal) |
| Connection Type | Quick-disconnect (push-button release) |
| Tube-Side Fitting | Threaded pagoda barb |
| Compatible Tube OD | 12-13mm (standard ASIC hydro tube) |
| Self-Sealing on Disconnect | Yes (both halves) |
| Compatible Radiators | Lian Li radiator and fan pipe assemblies |
| Working Pressure | 1.0-2.5MPa typical |
| Operating Temperature | -10°C to +80°C |
FAQ — Double-Seal Quick Connector
Q: Will it fit my Whatsminer M53 / M63 / M66 hydro loop?
A: The connector uses standard 12-13mm OD tube thread; most Whatsminer hydro M-series use this profile. Confirm the pipe thread (G1/4" or M14 typical) on your specific model before ordering — email us with your miner SKU if unsure.
Q: Single-seal vs double-seal — does it really matter?
A: Yes. Single-seal couplings can develop weep leaks after 50-100 disconnect cycles as the O-ring wears. Double-seal couplings retain leak-tight performance well past 500 cycles, making them the right choice for any production farm with frequent maintenance.
Q: Can I use it with PC-grade quick-disconnects (Koolance, EK-QDC)?
A: No — mining hydro couplings use a different sealing profile than PC liquid cooling. Always pair quick-disconnects of the same manufacturer family.
Q: How much coolant is lost on disconnect?
A: With the self-sealing both-halves design, expect <1mL coolant loss per disconnect — significantly less than non-sealing quick-disconnects.
Q: Bulk pricing for mining farms?
A: Yes — email contact@lys-sz.com for volume pricing on full-farm coupling kits.
Related products
- 304 Stainless Steel Mini Ball Valve 1/2" 12mm (Water Cooling)
- Antminer S19XP Hyd Radiator (Water Cooling)
- Whatsminer M53/M63 Hydro Quick Connector (Self-Sealing)
- Silicone Water Pipe Hose (ASIC Hydro Cooling)
Setting up a hydro mining farm or building a maintenance kit? Email contact@lys-sz.com for bulk coupling and tubing pricing. Worldwide shipping from our Shenzhen warehouse.
Shipping & Customs
🇺🇸🇪🇺 USA & European Union (DDP):
Orders are delivered DDP (Delivered Duty Paid). All customs duties, import taxes, and fees are included — no additional charges on delivery.
🌍 Rest of world:
Orders ship from China. Depending on your country, local customs authorities may apply import duties or taxes. Any such fees are set by your local authorities and are not included in the product price.
Buying in bulk for a mining farm or repair shop?
Get dedicated B2B pricing on this part and across our full catalog — quote response within 24 hours, payment by T/T USD bank wire, and DDP delivery available for US & EU customers (and other lanes on request).
