Programming Tool Hashboard Code Editor for Antminer all series

Resolve the issue of conflicting antminer hash board code data, which prevents the miner from operating correctly and causes the hash board to malfunction. Typically, the reparation of a hash board wipes the data from the board, which is determined by the program, rather than an individual.

Boost Mining Efficiency with Antminer Hash Board Code Editor

When your Antminer is powered on, it will detect if the hash board code is normal or not; if codes are abnormal, the miner will fail to start up. Common errors that lead to code abnormality include "eeprom error, eeprom exception, socket link failure, etc. When combining 3 hash boards from different miners, it can result in the failure of the assembly, which is the root cause of the code inconsistency. These issues don't always arise, but they can be fairly common. In the event of miner failure due to any of the mentioned causes, please utilize this tool to properly sync data.

EEPROM Data Sync, Hash Board Repair, Compatible with Multiple Models

The aim is to ensure that the same data is shared between the three hash boards by retrieving the information from one board via the IO interface and then sending it to the other two. This will enable the miners to function accordingly. The following Antminer models are included in the list of commonly encountered fault models:  S21, T21, S21 Pro, S21 Hydro, KA3, S19j XP, S19 Pro Hydro+, S19 Pro+, S19j Pro+, S19K Pro, T19, S19, S19 Pro, S19j, S19j Pro, S19A, S19A Pro, S19_88, T19 Hydro, S19 Hydro, S19 Pro Hydro, S19j Pro No Pic, S19XP, S19AL, S19+, S19i, L7, S7, D7, K7, T17, T17+, T17e, T17 Pro, S17, S17+, S17e, S17 Pro, S11, S15, T15 and S9k S9se .

Please be aware that Antminer S9, T9+ and L3+ are not supported by this device.

Antminer Hash Board Code Editor - Efficiently Resolve Hash Board Sync Issues

Additionally, the hash board that was scanned by the test device may also experience data loss. Boards require that the code of the hash boards must be consistent with the code of the miner when loading them; otherwise, the whole miner may not be able to function.

Keys and interface description

Start operation: read data

First click the "NF" button to enter the function menu

Start operation: write data

First click the "NF" button to enter the function menu

Complete data writing

 After clicking the "OK" button, the prompt tone of the device is once, indicating that the writing is successful. The prompt tone is twice, indicating that the writing failed.

Schematic diagram of results:

1. File name
2. Number of successful writes
3. Number of write failures