Premium Power Cord for Antminer Hydro S19 T19 S19 Pro+ S21 Hydro APW11 to PDU

Premium Power Cord for Antminer Hydro Series – APW11 PSU to PDU Connection

This premium AC power cord is engineered for the Antminer Hydro series — S19 Hydro, T19 Hydro, S19 Pro+ Hydro and S21 Hydro — connecting the APW11 power supply to a PDU (Power Distribution Unit). The 1.5m heavy-duty cable uses advanced construction for low-resistance, high-current delivery under the sustained loads that hydro-cooled miners demand. Custom lengths available on request.

Why Hydro Miners Need a Dedicated Cord

Hydro-cooled Antminers run at higher sustained wattages than their air-cooled equivalents because there is no thermal throttling. The APW11 PSU draws more current from the mains, which places greater stress on the AC power cord. A standard-grade cord will develop resistive heating at the connectors and along the conductor, risking intermittent shutdowns or connector damage. This premium cord is rated for the full continuous current draw of the APW11 with margin for safe operation.

Installation

Plug the PSU-side connector into the APW11's AC inlet until fully seated. Connect the PDU-side plug to your power distribution unit or circuit breaker. Verify both connections are firm — a partially seated plug will arc under the high current draw. Route the cord away from coolant lines and ensure it does not obstruct access to the hydro manifold connections.

Hydro Power Cord Specifications

Related Antminer Hydro Power & Cooling Accessories

• Antminer S21 / S19j XP Power Cord – APW17 PSU to PDU
• S21 Immersion Cooling Oil-Resistant Power Cord
• APW11 PSU Water Cooling Plate – S21XP / S19XP Hydro
• 20A 500V Ceramic Fuse – APW11 PSU Repair

Deploying hydro-cooled Antminers? Contact us at contact@lys-sz.com for power cords, cooling plates and APW11 accessories.

Worldwide shipping from our Shenzhen warehouse.