Whatsminer M50 M60 Series Test Fixture for Hashboard ASIC Chip Scanning

Whatsminer M50 / M60 Series Test Fixture – Hashboard ASIC Chip Scanning

This Whatsminer M50 / M60 series test fixture is a professional bench tool for hashboard ASIC chip scanning and fault detection on Whatsminer M50 and M60 class miners. It isolates faulty chip positions on the board, produces a chip-count scan that matches the miner's own firmware check, and lets repair technicians target exactly which ASIC to rework — skipping the expensive trial-and-error approach of swapping entire chains.

Test Fixture Specifications

Why a Dedicated Test Fixture Speeds Up Hashboard Repair

Without a fixture, diagnosing a faulty M50 / M60 hashboard means mounting it back in a full miner, running firmware diagnostics, pulling it out, and repeating after each fix — hours per board. A dedicated fixture powers the board directly, runs a rapid chip scan, and gives the technician a coloured map of healthy vs. failed ASIC positions. Across a farm-scale repair bench this typically cuts diagnostic time by 5–10× and improves rework yield.

Expert-Use Only

This fixture ships without technical support and is intended for experienced hashboard repair technicians who already work with ASIC-level rework. If you are new to hashboard diagnostics, pair the fixture with your existing repair training or service partner. Never operate the fixture outside its spec power range and always check pad continuity before each scan.

Related Whatsminer M-Series Test & Repair Parts

• Whatsminer M60 / M50 / M30 Hashboard Tester
• Whatsminer M20 / M30 / M50 Test Fixture Cable – 16p / 22p
• Whatsminer M30 / M50 ASIC Test Fixture
• Whatsminer 14-pin Test Fixture Cable – M20 / M30 / M31 / M32 / M50

Diagnose M50 / M60 hashboards in minutes, not hours. Order online or contact us at contact@lys-sz.com for repair-shop bulk pricing. Worldwide shipping from our Shenzhen warehouse.