NCT218 T2F T2Y T2H Temperature Sensor for Antminer S17+ S17e L7 Hashboard repair

NCT218 Digital Temperature Sensor – Precision Thermal Monitoring for Antminer S17+, S17e & L7 Hashboards

The NCT218 is a dual-channel digital thermometer with over/under-temperature alarm capability, designed as a direct replacement for the T2F, T2Y and T2H variants found on Antminer S17+, S17e and L7 hashboards. Its compact DFN package, low 1.4–2.75 V operating voltage and ±1 °C remote-diode accuracy make it the ideal component for restoring reliable thermal management on boards that trigger false overtemperature shutdowns or report erratic temperature readings.

When to Replace the NCT218

A failing temperature sensor on a hashboard can manifest in several ways: the board may report temperatures that jump erratically between readings, the miner firmware may trigger protective shutdown even though the heatsink feels cool to the touch, or the control board log may show I2C communication errors referencing the T2F, T2Y or T2H address. In all of these scenarios, replacing the NCT218 is the most cost-effective first step before investigating deeper issues like damaged thermal diodes or trace corrosion.

Replacement Procedure

Locate the sensor IC on the hashboard — it is typically positioned near the ASIC chain it monitors and carries the T2F, T2Y or T2H silkscreen marking. Apply flux, then use a hot-air station set to 280–300 °C with medium airflow to remove the old IC. Clean the pads with solder wick, place the new NCT218 with correct pin-1 orientation, and reflow. After reassembly, boot the miner and verify that the temperature reading is stable and within 5 °C of the ambient intake air temperature at idle.

The NCT218's built-in series-resistance cancellation (up to 500 Ω) helps maintain accuracy even when trace impedance varies between hashboard revisions, making it a robust drop-in replacement across S17+, S17e and L7 generations.

NCT218 Temperature Sensor Specifications

Related Components

• LM75A Temperature Sensor – Antminer & Whatsminer
• S75 Temperature Sensor – Antminer & Whatsminer
• ATH937 EEPROM – Antminer T17e S17e S17 Hashboard
• BM1397 ASIC Chip – Antminer S17 T17 Hashboard

Questions about compatibility with your specific hashboard revision? Contact us at contact@lys-sz.com — our mining engineers can help identify the correct variant for your board.

Worldwide shipping from our Shenzhen warehouse.