Antminer BM1744AB Chip Stencil Plate – ASIC Tinning Tool for Z11 Hash Board
Couldn't load pickup availability
Have questions about this product? Our team is here to help — just reach out on WhatsApp.
💬 Contact Us on WhatsAppAbout the Product
Antminer BM1744AB Chip Stencil Plate | High-Temperature Stainless Steel Mesh Tinning Tool for Antminer Z11 Hashboard ASIC Replacement Repair
The BM1744AB Chip Stencil Plate is the dedicated tinning fixture for BM1744AB ASIC chip replacement on Antminer Z11 hashboards. Built for the Equihash mining audience servicing Zcash fleets — Z11 hashboards rely on the BM1744AB chip, and chip-level reballing demands a precise stencil to avoid solder bridges between fine-pitch pads.
Engineered from high-grade stainless steel mesh with laser-cut aperture geometry matching the BM1744AB OEM footprint. Resists deformation under sustained reflow heat (rated to 300°C / 572°F without warping). Anti-static construction protects the BM1744AB chip's ESD-sensitive gate structures during tinning — silent ESD damage is the #1 cause of failed chip replacements that pass visual inspection but die in service.
When to Use the BM1744AB Stencil Plate
- Failed BM1744AB chip replacement on an Antminer Z11 hashboard — fresh tinning before reflow.
- Z11 fleet refurbishment — volume chip swaps across multiple boards benefit from a dedicated stencil vs manual paste application.
- Post-failure salvage workflow — re-tinning surviving BM1744AB chips that came off a board during a fault event.
- Pre-deployment QC — clean tinning on chips installed during refurbishment.
- Repair shop standardisation — stencil-driven workflow replaces freelance manual paste application for consistent quality.
BM1744AB Stencil Plate Specifications
| Feature | Specification |
|---|---|
| Stencil Type | Chip-tinning stencil plate (laser-cut aperture) |
| Target Chip | BM1744AB ASIC (Equihash hashing engine) |
| Compatible Miner | Antminer Z11 (Zcash) |
| Material | High-grade stainless steel mesh |
| Cut Method | Laser-cut precision |
| Heat Resistance | Up to 300°C (572°F) — no deformation |
| Static Protection | Anti-static construction (ESD-safe) |
| Durability | Ultra-durable, built for repeated reflow cycles |
| Required Equipment | Solder paste + hot-air rework station (not included) |
| Condition | Brand New |
FAQ — BM1744AB Stencil Plate
Q: Is the Antminer Z11 still economically viable for mining in 2026?
A: Z11 economics depend on Zcash price and difficulty trajectory. Operators with low-cost power and existing Z11 fleets continue to run them; new deployments are rare. Chip-level repair is a cost-effective path to keep existing fleets producing vs writing off boards.
Q: Why does anti-static matter for BM1744AB?
A: The BM1744AB gate structures are ESD-sensitive (typical for SHA-256 / Equihash ASICs). A stencil that builds static charge during repeated handling can damage the chip silently — no visible damage, but the chip dies in service. Anti-static construction is mandatory for production-grade reballing.
Q: What rework station temperature profile should I use?
A: Follow the BM1744AB recommended reflow profile (typically 280-320°C peak with controlled ramp). The stencil tolerates 300°C continuous without deformation; brief peaks above 300°C during reflow are acceptable.
Q: Bulk pricing for repair shops?
A: Yes — email contact@lys-sz.com with your monthly volume. Multi-stencil discounts available for Z11 fleet operators.
Related products
- BM1762AA Tin Tool Fixture – Antminer Z15 Hashboard
- BM1760 Stencil – Antminer D3 Hashboard
- BM1766AA Stencil – Antminer D9 Hashboard
- BM1362 Stencil – Antminer S19j Pro Hashboard
Z11 repair shops stocking BM1744AB stencils by the set? Email contact@lys-sz.com for bulk pricing. Worldwide shipping from our Shenzhen warehouse.
Buying in bulk for a mining farm or repair shop?
Get dedicated B2B pricing on this part and across our full catalog — quote response within 24 hours, payment by T/T USD bank wire, and DDP delivery available for US & EU customers (and other lanes on request).
