Collection: Crypto Miner ASIC Cooling Fans

ASIC Cooling Fans for Crypto Miners — 12cm and 14cm Hashboard Cooling

The cooling fans on a crypto miner are working harder than almost any other moving part in your operation — running 24/7 at 5 000-7 200 RPM, pushing air through dense hashboard heatsinks at 50-60°C ambient. When they fail, your miner thermals out within minutes. This collection covers every 12cm and 14cm ASIC cooling fan we stock for Antminer, Whatsminer, Avalon, Iceriver, Goldshell, Innosilicon and other crypto miner brands — high-static-pressure axial fans engineered for the airflow restriction of mining hashboards.

Choose the right ASIC cooling fan for your miner

Three things to match when replacing a miner fan : size, connector type, and electrical rating. The wrong combination causes thermal shutdowns or PWM mismatches :

• 12cm 4-pin square ATX connector — used on Antminer S19 / T19 / S19j Pro / S19 K Pro / S19j XP / KS5 / L7 air-cooled, and Goldshell KD5 / KD6 / CK5 / CK6 hashboard fans. Examples : DB12038B 12V for S21 / KS5 Pro, Df1203812B2UN Martech 12V 2.7A 12cm 4-pin for L7 / S19, QFR1212GHE 120×120×38 high-speed 6 000RPM 12V 2.7A for L3+ / S9 / S17 / T17.
• 14cm 4-pin square ATX connector — used on Antminer S21 / S21 Pro / T21 / S21 XP, Whatsminer M30 / M31 / M32 / M50 / M60 for hashboard cooling.
• 14cm 6-pin linear KF2510 connector — KZ14038B012U 12V 7.2A 6-pin 14cm for M20 / M21, GH14038BZW-1 14cm for M20-M60 series (4P & 6P models), original KZ14038B012U 14cm 12V 7.2A high-speed replacement.
• 12cm 6-pin or 4-pin for Innosilicon and Goldshell — GH12038H-Z 120×120×38mm DC12V 2.7A for Innosilicon T2T (4P / 6P options), Y-Y 12038H12B 12V 4.35A for Goldshell KD5 / KD6 120×38mm, WSA12038B12U Aisen Lovecore A1 Pro 120×120×38mm.

What's in this collection

39+ ASIC cooling fans organised by brand and form factor :

• For Antminer — DB12038B for S21 / KS5 Pro, Df1203812B2UN Martech for L7 / S19, QFR1212GHE 6 000RPM for L3+ / S9 / S17 / T17, SJ SG121238BS for Antminer / Elphapex, plus 14cm variants for S21 series.
• For Whatsminer — KZ14038B012U 12V 7.2A 6-pin for M20-M60, GH14038BZW-1 14cm for M20-M60 (4P / 6P), original 14cm 12V 7.2A high-speed replacement.
• For Goldshell — Y-Y 12038H12B 12V 4.35A KD5 / KD6, Aub0812VH 80mm 12V 0.41A for PSU cooling, plus dedicated 120mm fans for KD / CK / HS / LT series.
• For Innosilicon — GH12038H-Z 120×120×38mm DC12V 2.7A for T2T 4P / 6P configurations.
• Generic high-performance replacements — XD1238H12B-6 axial 120×120×38mm 12V 2.7A 6 000RPM ball bearing brushless DC, WSA12038B12U Lovecore A1 Pro 6 300RPM, broad-compatibility 120×38mm fans for cross-brand use.

Why source ASIC cooling fans from LYS Shenzhen

Three reasons mining farm engineers and repair shops standardise on our fans :

• Bearing-tested before shipping — every fan is spun up to rated RPM and checked for bearing noise and tachometer signal accuracy before it leaves the warehouse. We catch defective units before you get them.
• Genuine and compatible options — original OEM fans for current Whatsminer M-series and Antminer S-series, plus tested third-party compatibles for older models where OEM is EOL. Pricing reflects the difference clearly.
• Bulk pricing for fleet maintenance — typical fleet replacement cycle is 12-18 months per fan ; at 100+ miners that's 200+ fans / year minimum. Our quote-based pricing makes preventive replacement affordable. Worldwide shipping with DDP option for US and EU customers.

Frequently asked questions

Can I substitute a 6 000 RPM fan for a 5 500 RPM original ?
Mining ASIC firmware monitors the tachometer signal and shuts down on out-of-range readings. A 9 % overspeed (6 000 vs 5 500) is usually within firmware tolerance, but anything above ~15 % can trigger a fault. Match the original RPM unless you also install a fan speed simulator to spoof the signal.

What's the difference between 12cm and 14cm fans — can I use 14cm in a 12cm slot ?
No, the chassis mounting holes are different. 12cm fans (120×120×38mm) and 14cm fans (140×140×38mm) are not interchangeable. Antminer S19 / S21 generations use 12cm or 14cm depending on the model — check the existing fan dimensions before ordering.

Do you stock immersion-rated fans, or do I use a simulator instead ?
For immersion-cooled miners we recommend fan speed simulators rather than physical fans (the cooling fluid does the cooling, not the fan). Simulators spoof the tachometer signal to keep the firmware happy without spinning a fan in oil. See our Fan Simulator collection.

Get a custom quote for bulk ASIC cooling fans

For mining farms and repair shops doing preventive fan replacement on rolling fleet maintenance cycles, our bulk pricing on 12cm and 14cm fans reflects the realities of fleet ops. Send your typical reorder list and miner mix and we'll quote back with options.

Get Business Pricing →