Antminer Hashboard Code Editor EEPROM Programming Tool
Couldn't load pickup availability
Have questions about this product? Our team is here to help — just reach out on WhatsApp.
💬 Contact Us on WhatsAppAbout the Product
Antminer Hashboard Code Editor – EEPROM Programming and Synchronization Tool
The Antminer Hashboard Code Editor is a dedicated EEPROM programming and synchronization tool that resolves one of the most common failure modes on repaired Antminer hashboards: mismatched or corrupt EEPROM data across the three hashboards of a single miner. When codes don't match, the miner throws "eeprom error", "eeprom exception" or "socket link failure" at startup and refuses to hash. This tool reads the EEPROM of a known-good hashboard and writes the matching configuration to the other two, restoring the miner to normal operation.
Code Editor Technical Specifications
| Parameter | Specification |
|---|---|
| Device Type | Hashboard EEPROM Code Editor / Programming Tool |
| Function | Read / write / synchronize EEPROM data across three hashboards |
| Target EEPROM | On-board serial EEPROM (AT24C02, GT24C02, 93C66 families) |
| Common Error Codes Fixed | "eeprom error", "eeprom exception", "socket link failure", code mismatch |
| Compatible Antminer Models | S21, T21, S21 Pro, S21 Hydro, KA3, S19j XP, S19 Pro Hydro+, S19 Pro+, S19j Pro+, S19K Pro, T19, S19, S19 Pro, S19j, S19j Pro, S19A, S19A Pro, T19 Hydro, S19 Hydro, S19 Pro Hydro, S19XP, S19AL, S19+, S19i, L7, S7, D7, K7, T17, T17+ |
| Compatible Chipsets | BM1387B, BM1397, BM1485, BM1746 and later |
| Interface | I/O cable to hashboard EEPROM header |
| Power Source | USB / on-board (no external PSU required) |
| Weight | 1 kg |
| Condition | Brand New |
When to Use the Antminer Hashboard Code Editor
Hashboard repair typically involves reflowing ASIC chips, replacing defective components, or swapping boards between miners. Any of these operations can wipe or corrupt the EEPROM data that the control board expects to see. Most commonly, this happens when a technician combines three hashboards sourced from different miners to rebuild a working unit — the code inconsistency is the root cause of "miner fails to start" complaints after otherwise successful repair. This tool eliminates that problem by writing a consistent EEPROM image to all three boards in under a minute.
Workflow: EEPROM Sync in Three Steps
First, identify the "golden" hashboard — the one with working, correct EEPROM data. Second, connect the code editor to the golden board's EEPROM header and read the data. Third, connect the editor to each of the remaining hashboards and write the same data. Power-cycle the miner and confirm startup. The whole sync operation takes less than two minutes per miner. Repair shops running high volume should keep one code editor per bench to avoid bottlenecks.
Related EEPROM and Hashboard Repair Tools
- ATH93702DMCN1937 EEPROM – Antminer Hashboard
- ATH915 AT24C02D EEPROM IC
- GT24C02A GT402A EEPROM for Antminer S19 / S21 / T21
- Hashboard EEPROM Programming Cable – Universal
Stop losing hours to "eeprom error" after hashboard repair. Order the code editor now or contact us at contact@lys-sz.com for training resources, batch pricing and model-specific compatibility advice. Worldwide shipping from Shenzhen.
Buying in bulk for a mining farm or repair shop?
Get dedicated B2B pricing on this part and across our full catalog — quote response within 24 hours, payment by T/T USD bank wire, and DDP delivery available for US & EU customers (and other lanes on request).
