Goldshell Test Fixture Hashboard Faulty Chips Scanning device HS5 CK5 CK6 KD5 KD6 LT5

Goldshell Test Fixture | Hashboard Faulty Chip Scanning Device for HS5 CK5 CK6 KD5 KD6 LT5

The Goldshell test fixture is a dedicated hashboard diagnostic tool used by repair benches and mining-farm operators to identify faulty ASIC chips on Goldshell hashboards. Each fixture is carefully assembled with the matching control board, pre-installed test firmware, power cord, hashboard cable, and a fan simulator — everything needed to power up a suspect hashboard outside its original chassis, scan its chip chain, and report which positions need replacement.

Compatible models cover the bulk of the Goldshell line: HS5, CK5, CK6, KD5, KD6, LT5, LT5pro. The fixture models are independent — one fixture works with a single Goldshell miner family. Before purchasing, mention to the sales team which model you need so the correct fixture variant ships. Every unit is tested before shipment to guarantee proper working order — this is real repair-bench hardware, not a generic adapter.

This Device Lets You Scan the Faulty Chips on Your Goldshell Hashboards

Once the faulty chips are detected, you know exactly which positions to swap to restore optimal hashrate. For a busy repair bench, this turns ASIC repair into a deterministic workflow: connect the suspect board, scan, get the chip-position list, queue the rework. The included fan simulator removes the firmware fan-fault that would otherwise prevent the test fixture from running outside the original miner chassis.

Why Use a Dedicated Goldshell Test Fixture

• No chassis required — power the hashboard standalone, no need to keep a working miner just for diagnostics.
• Deterministic chip-fault list — replaces guesswork (resistance probing, visual inspection) with a printed report.
• Faster repair throughput — repair shops processing multiple Goldshell boards per day cut diagnostic time from hours to minutes per board.
• Pre-installed firmware — no setup, no flashing — connect and scan.
• Includes fan simulator — bypasses the controller's mandatory fan-tach check.

Goldshell Test Fixture Features

FAQ — Goldshell Test Fixture

Q: Can one fixture handle multiple Goldshell models?
A: No — each fixture variant works with one Goldshell miner family only (HS5, CK5/CK6, KD5/KD6, or LT5/LT5pro). Specify which model you need when ordering.

Q: Do I need a separate PSU?
A: The fixture ships with a power cord but you'll need a compatible Goldshell PSU (or a bench PSU with the same voltage and current capacity) to drive the hashboard during testing.

Q: Can I test third-party (non-Goldshell) hashboards with this?
A: No — the fixture firmware and connector pinout are Goldshell-specific. Use the Innosilicon, Antminer, or Whatsminer test fixtures for those brands.

Q: How long does a typical chip scan take?
A: Around 60-120 seconds per hashboard, depending on the model and chip count.

Q: Do you ship worldwide?
A: Yes — DDP for US and EU (duties included), standard shipping with local customs elsewhere.

Related products

• Goldshell HS5 Control Board PCBA
• Goldshell CK5 / CK6 Control Board PCBA
• Goldshell LT5 / LT5pro Control Board PCBA
• Goldshell KD5 / KD6 Control Board PCBA

Equipping a Goldshell repair bench across multiple model variants? Email contact@lys-sz.com with the miner models you service — we will quote the matching fixture set. Worldwide shipping from our Shenzhen warehouse.