Sunshine SL-936D Intelligent Control Anti-Static Electric Soldering Iron

Sunshine SL-936D Intelligent Control Anti-Static Electric Soldering Iron | 80W ASIC Repair Tool

The Sunshine SL-936D is an intelligent-control 80W anti-static soldering iron designed for precision repair work on ASIC miner PCBs, control boards, and PSUs. With its built-in temperature regulation, 900-series iron-tip compatibility, and anti-static / anti-leakage construction, the SL-936D is the right bench-grade soldering iron for through-hole rework and component-level repair on mining hardware — the workhorse complement to a hot-air gun, multimeter, and desoldering station.

Operating on AC 200-240V at 60Hz with a rated power of 80W (constant temperature), the iron delivers a stable 180-480°C tip temperature range with calibration error under ±4°C — accurate enough for sensitive component rework. A breakdown voltage greater than 1200V provides solid electrical isolation between the heating element and the tip, protecting both the operator and the static-sensitive boards being worked on. The whole tool weighs just 200g (including tip, heater, and power cord) for fatigue-free extended use.

Where the SL-936D Earns Its Place on a Mining Repair Bench

• Through-hole component replacement — capacitors, inductors, MOSFETs, connectors on hashboards and PSUs.
• SMD rework with appropriate tips — 900-series tip family covers fine-pitch chip pins to bulk solder joints.
• Cable and connector assembly — power harnesses, sensor leads, control board headers.
• Solder-bridge clean-up on hashboard repair after BGA rework.
• Tinning the soldering iron tip — quick maintenance between rework operations.

Specs and Technical Features

• Rated power 80W constant temperature — fast heat-up and good thermal recovery under load.
• AC 200-240V 60Hz input — fits standard mining-bench mains supply.
• Temperature range 180-480°C — covers lead-free and leaded solder profiles.
• Calibration error <±4°C — accurate enough for sensitive component work.
• Tin melt time 18-20 seconds — from cold-start to working temperature.
• 900-series iron tip family — wide range of tip shapes available from the same vendor.
• 936D heater core — replaceable wear part.
• Anti-static / anti-leakage construction — protects static-sensitive ICs on hashboards.
• Breakdown voltage >1200V — solid electrical isolation between heater and tip.
• 200g machine weight — including tip, heater, and power cord.

Sunshine SL-936D Soldering Iron Specifications

FAQ — Sunshine SL-936D Soldering Iron

Q: What replacement tips fit the SL-936D?
A: The SL-936D uses the standard 900-series iron-tip family — including conical, chisel, knife, and bevel shapes. You can mix tip styles for different rework jobs (fine for SMD, chisel for bulk through-hole joints).

Q: Is 80W enough for through-hole work on hashboards?
A: For most ASIC hashboard through-hole work (inductors, capacitors, connectors), 80W is well-sized — provides good thermal recovery without overheating sensitive pads. For very large heatsinks or thick copper planes, a higher-wattage iron is sometimes faster.

Q: Will it work on lead-free solder?
A: Yes — the 180-480°C range covers both leaded (Sn63/Pb37 melts at 183°C) and lead-free (SAC305 melts at 217°C) solder profiles. Typical working tip temperature for lead-free is 350-380°C.

Q: How do I calibrate the temperature?
A: The unit ships factory-calibrated to within ±4°C. If you need to verify, use a tip-temperature meter at a fixed setpoint (e.g. 350°C) — drift outside ±4°C suggests the heater core needs replacement.

Q: How do I replace the 936D heater core when it fails?
A: Always disconnect the power plug from the iron before replacing the heater core — never service the iron while it's plugged in. The 900-series tip family and the 936D heater core are both user-replaceable wear parts; expect to replace the heater every 12-18 months of daily bench use.

Q: Bulk pricing for repair shops?
A: Yes — email contact@lys-sz.com for volume pricing on full Sunshine tool kits.

Related products

• ANLIXIN-862D 2-in-1 Desoldering Station
• QUICK 885 Hot Air Gun 1800W (ASIC Repair)
• Fluke 15B+ Handheld Digital Multimeter
• V-51 Silicone Repair Mat 450×300mm 500°C

Equipping a new ASIC repair bench or restocking soldering supplies? Email contact@lys-sz.com for volume pricing on Sunshine tools and complete bench kits. Worldwide shipping from our Shenzhen warehouse.