74LVC4245APW-Q100J IC for Antminer APW12 / APW17 PSU Repair
Couldn't load pickup availability
Have questions about this product? Our team is here to help — just reach out on WhatsApp.
💬 Contact Us on WhatsAppAbout the Product
74LVC4245APW-Q100J Octal Dual-Supply Translating Transceiver | Replacement Logic IC for Antminer APW12 and APW17 PSU Repair
The 74LVC4245APW-Q100J is an octal dual-supply translating transceiver used on the Antminer APW12 and APW17 power supplies for level shifting between mixed 3V and 5V logic domains. When this IC fails, communication between the PSU controller and the secondary side hangs, the PSU misreports status to the miner, or the unit refuses to come out of standby. Drop-in replacement restores the level translation path and brings the PSU back to spec.
Built to AEC-Q100 automotive grade standards for industrial-grade durability under continuous mining duty. Schmitt-trigger inputs give high tolerance for slow transitions and noise — exactly what you want on the level-shifting path of an ASIC PSU. OE and DIR pins provide output enable and direction control. 3-state bus-compatible outputs handle bidirectional data flow. Package is TSSOP-20 SMD.
When to Replace the 74LVC4245APW-Q100J
- PSU communication failure with the miner — status reporting hangs, level translator dead.
- PSU stuck in standby — enable signal not propagating through the translator to the controller.
- Erratic or incorrect status flags reported to the miner — translator outputs degraded, signal integrity lost.
- Visible damage on the IC — burn marks, lifted pins, surge damage from an upstream transient.
- Preventive PSU refurbishment — replace alongside electrolytics during a complete PSU rebuild on used APW12 / APW17 units.
74LVC4245APW-Q100J Specifications
| Feature | Specification |
|---|---|
| Part Number | 74LVC4245APW-Q100J |
| Function | Octal dual-supply translating transceiver |
| Supply Voltage | 3.0 V to 5.5 V |
| Input Type | Schmitt-trigger |
| Outputs | 3-state bus-compatible |
| Control Pins | OE (output enable), DIR (direction) |
| Operating Temperature | −40°C to +125°C |
| Package | TSSOP-20 (SMD) |
| Qualification | AEC-Q100 automotive grade |
| Compatibility | Antminer APW12, APW17 power supplies |
FAQ — 74LVC4245APW-Q100J
Q: Is the AEC-Q100 version interchangeable with the standard 74LVC4245APW?
A: Same electrical function — the Q100J is the automotive-grade qualified variant. For ASIC mining duty either variant works; the Q100J is the part Bitmain typically specs for the APW12 / APW17 production.
Q: How do I confirm this IC is the failed component vs another part on the PSU control circuit?
A: Probe the IC's outputs on a working PSU vs your suspect — if the outputs are stuck high or low while the inputs are toggling, the translator is dead. Continuity checks on Vcc and ground also catch obvious package failures.
Q: What package replacement equipment do I need?
A: TSSOP-20 reflow with hot-air rework or a small soldering iron with fine tip. Standard repair-bench equipment for any modern PSU repair shop.
Q: Bulk pricing for repair shops?
A: Yes — email contact@lys-sz.com with your monthly volume. Tube and reel quantities are stocked.
Related products
- SN74LVC1G14DCKR Single Schmitt Trigger Inverter
- SN74AUP1T34 Voltage Level Shifter – Antminer Hashboard
- M74VHC1GT08 Logic Level Shifter – Iceriver KS1
- NLSV1T34 Dual-Supply Non-Inverting Level Translator
Repair shops stocking 74LVC4245APW-Q100J ICs by the tube? Email contact@lys-sz.com for bulk pricing. Worldwide shipping from our Shenzhen warehouse.
Buying in bulk for a mining farm or repair shop?
Get dedicated B2B pricing on this part and across our full catalog — quote response within 24 hours, payment by T/T USD bank wire, and DDP delivery available for US & EU customers (and other lanes on request).
