Antminer K7 Water Cooling Plate Enhanced Cooling Performance

Antminer K7 Water Cooling Plate Kit | Enhanced Cooling Performance for Bitmain Miner

The Antminer K7 Water Cooling Plate Kit is a complete water-cooling upgrade for the Antminer K7 mining system. Built around high-quality aluminum cooling plates sized for the K7 hashboard footprint, the kit converts an air-cooled K7 into a water-cooled deployment — effectively dissipating heat from the hashboards, lowering operating temperature, and reducing the fan-noise signature of the miner.

Effective heat management is critical for ASIC service life — particularly on the K7 which mines the Eaglesong algorithm at ~63.5 TH/s with ~3080W power draw, meaning the miner dissipates the full 3kW as heat that must go somewhere. Every 10°C reduction in chip junction temperature roughly doubles MTBF on the hashing chips. The K7 cooling plate kit replaces the stock air-flow path with a direct-contact cold plate against each hashboard, channeling heat into the water loop instead of the room. The result is stable performance, extended hardware lifespan, and a quieter, more efficient mining environment.

What's in the Kit

• Six aluminum water cooling plates — sized for the K7 hashboard footprint, direct-contact heat transfer.
• Two 1-to-6 water cooling water separators — split flow from the supply line to the six plates and back.
• Two meters of silicone water pipe — flexible internal manifold tubing.
• Two meters of main water pipe — supply / return tubing to the radiator.
• Clamps — secure tube-to-fitting connections under operating pressure.

Why Upgrade an Antminer K7 to Water Cooling

• Effective heat dissipation — direct-contact cold plate vs forced-air convection on the hashboards.
• Stable hashrate — lower chip temperature stabilizes the per-chip frequency, reducing throttling.
• Extended hardware lifespan — every 10°C drop in junction temperature roughly doubles ASIC MTBF.
• Faster cooling and lower noise — water loop runs quieter than the original fan setup.
• User-friendly installation — kit ships with everything needed except radiator and pump.

Antminer K7 Water Cooling Plate Kit Specifications

FAQ — Antminer K7 Water Cooling Plate Kit

Q: Does the kit include a radiator and pump?
A: No — the kit ships with the cooling plates, separators, tubing, and clamps. You'll need to pair it with a radiator, reservoir, and pump sized for the K7's full ~3080W heat load. Check our 8kW and 12kW Lian Li ASIC water-cooling kits for complete loop solutions.

Q: Can I run the K7 cooling plates with distilled water alone?
A: Distilled water works short-term but allows microbial growth over weeks. For continuous operation, use a 50/50 distilled water + propylene glycol mix with a corrosion inhibitor — the standard recipe for mining hydro loops.

Q: How much performance gain should I expect vs air-cooled?
A: Water cooling typically allows the K7 to run at slightly higher chip frequency without throttling, and dramatically reduces fan-noise. The hashrate uplift varies (often 3-8% depending on overclock profile) but service-life improvement is the bigger win.

Q: Is the installation reversible?
A: Yes — the cooling plates mount over the hashboards without permanent modification. You can revert to the original air-cooled configuration if needed.

Q: Bulk pricing for fleet hydro conversion?
A: Yes — email contact@lys-sz.com for volume pricing on K7 hydro conversion kits.

Related products

• Lian Li 12kW ASIC Water Cooling Kit
• Lian Li 8kW ASIC Water Cooling Kit
• Double-Seal Quick Connector (ASIC Water Cooling)
• 304 Stainless Steel Mini Ball Valve (1/2" 12mm)

Converting an Antminer K7 fleet to water cooling or stocking spare plates for hydro repairs? Email contact@lys-sz.com for bulk pricing and complete hydro-loop kit options. Worldwide shipping from our Shenzhen warehouse.