Antminer KS3 Thermal Grease Mold – Precision Hash Board Thermal Paste Template

Antminer KS3 Thermal Grease Mold | Precision Paste Application Template for KS3 Hashboard Heat-Sink Mating

The Antminer KS3 Thermal Grease Mold is the precision paste application template for the Antminer KS3 Kaspa miner hashboard. Sits over the hashboard footprint and lets the technician squeegee a clean, uniform paste layer across every chip that needs to mate with the heat sink — eliminating the uneven manual application that causes hot spots, accelerated chip degradation and reduced hashrate stability.

Built from durable, heat-resistant plastic with a precision-cut footprint that matches the KS3 hashboard geometry exactly. Apertures align with the ASIC chip positions; masked areas protect surrounding components from accidental paste contamination. Essential bench tool for any shop or owner doing periodic thermal grease refresh on KS3 fleets — and a workflow accelerator that cuts manual paste-application time substantially.

When to Use the KS3 Thermal Grease Mold

• Routine thermal grease refresh on aging KS3 units — original paste dried out, junctions throttling, fresh layer restores headroom.
• Post-chip-replacement reassembly — fresh grease layer over the entire hashboard before reseating the heat sink.
• Heat-sink swap or upgrade — clean grease layer needed when fitting a new sink onto an existing hashboard.
• Repair-bench volume work — repeatable paste application across multiple KS3 boards per shift.
• Pre-deployment refurbishment — fresh paste at intake on used KS3 units before redeployment.

Antminer KS3 Thermal Grease Mold Specifications

FAQ — KS3 Thermal Grease Mold

Q: Does the mold come with thermal grease?
A: No — this listing is the mold only. Pair with a high-conductivity silicone thermal grease (6 W/m·K minimum, 8 W/m·K preferred) for best results. See related products for HY206 / HY236 or G19 thermal grease.

Q: Will this mold fit the KS5 or KS5 Pro?
A: No — designed specifically for the KS3 hashboard footprint. KS5 / KS5 Pro use different hashboard geometries and need their own dedicated thermal grease mold.

Q: How often should I refresh thermal grease on KS3 miners?
A: Every 12-18 months under continuous mining duty, or whenever hashboard temperatures start trending higher than baseline. Cooler-running facilities can extend this; high-ambient facilities should refresh closer to 12 months.

Q: Bulk pricing for repair shops?
A: Yes — email contact@lys-sz.com with your monthly KS3 volume and we'll send tier pricing on the mold + thermal grease bundle.

Related products

• Iceriver KS3 C19 Power Cord
• HY206 / HY236 6W/m·K Thermal Grease 1kg
• G19 8W/m·K Blue Thermal Gel 1kg
• Iceriver KS Universal Hashboard Tester

Repair shops stocking KS3 thermal grease molds by the case? Email contact@lys-sz.com for bulk pricing. Worldwide shipping from our Shenzhen warehouse.