KS Universal Hashboard Tester for Iceriver Miner - ASIC Chip Troubleshooting Tool

Iceriver KS Universal Hashboard Tester | ASIC Chip Diagnostic Fixture for KS0 / KS1 / KS2 / KS3 / KS3M / KS3L / KS5L / KS5M Miners

The KS Universal Hashboard Tester is the dedicated diagnostic fixture for the Iceriver KS Kaspa miner family. Covers the full lineup from the entry-level KS0 up to the KS5M flagship — eight miner generations on a single bench tool. Plugs onto the hashboard, powers it from a bench PSU, and reports the position of failing ASIC chips along the chain plus any temperature-sensor faults.

Compatible with the Iceriver-specific ASIC chip families used across the KS range — P2SG48, P2SM88, P37P57, P38C03 and P49K68. The high-grade black shell houses precise cable ports for component protection, and the drop-proof construction is built for sustained repair-bench duty. Essential tool for any shop servicing Iceriver volume, and for individual KS operators diagnosing hashrate dropouts before deciding chip-level repair or board swap.

When to Use the KS Hashboard Tester

• One hashboard reports zero or partial hashrate — tester locates the failing chip along the chain so repair can proceed at the chip level.
• Temperature sensor faults flagged by the miner dashboard — tester confirms which sensor on which board is bad, avoiding blind board replacement.
• Pre-repair triage on used / second-hand KS hashboards — verify chip count and sensor health before investing in stencil + reflow work.
• Post-repair verification — confirm chain integrity after chip replacement before reinstalling the board in the miner.
• Volume diagnostics at the repair bench — single fixture covers the whole KS lineup, no per-model jig changeover.

Iceriver KS Universal Hashboard Tester Specifications

FAQ — KS Universal Tester

Q: Does this tester work with the older KS0 and KS1 plus the newer KS5L / KS5M?
A: Yes — single fixture covers all eight current KS miner generations. The interface and chip protocols across the KS family are compatible enough to run on one tester without per-model adapters.

Q: What bench PSU should I use?
A: The KPS3030D adjustable bench PSU is the recommended unit — provides the voltage and current required to scan a KS hashboard fully. Pair with a 6mm alligator clip power cable for the connection.

Q: Does the tester include the hashboard cooling base?
A: No — the cooling base is a separate item. KS hashboards under test on a long scan run will heat up; the cooling base extends safe test duration and prevents thermal damage during diagnostics.

Q: Bulk pricing for repair shops?
A: Yes — email contact@lys-sz.com with your typical bench equipment volume and we'll quote.

Related products

• Iceriver KS1–KS3M Original Replacement Control Board
• Iceriver KS5L / KS5M Control Board – Square Fan Connector
• Iceriver KS5L 1004LV100 ASIC Chip Tin Stencil – Hashboard
• Iceriver KS3M / KS3L Water Cooling Plate Kit

Repair shops stocking KS testers and KS bench accessories? Email contact@lys-sz.com for bulk pricing and bench-kit bundles. Worldwide shipping from our Shenzhen warehouse.