APW9+ Power Supply Unit 3600W – Brand New PSU for Antminer S17e, T17e, S17+ & T17+
The APW9+ is a brand-new Bitmain power supply delivering 3600W on its primary channel at 14.5–21V / 170A (220 V input), with a secondary 12.3V / 12A output for the control board. It is the factory-specified PSU for the Antminer S17+, T17+, S17e and T17e. Input range is 200–240 VAC, power factor exceeds 0.99 at full load, and ripple stays below 1 % on both channels — delivering the clean, stable power these high-wattage miners demand.
Installation
Disconnect mains and remove the old PSU. Mount the APW9+ in the chassis and connect the primary output harness to the hashboard power bus and the secondary output to the control board. Connect the AC input cable (200–240 V required — this PSU does not operate on 110 V). Power on and verify the miner dashboard shows correct hashboard voltages and stable hash rate. The force-air cooling system runs at 67 dBA under load; ensure the intake and exhaust vents are unobstructed.
APW9+ Power Supply Specifications
Parameter
Value
Model
APW9+
Primary Output
14.5–21V / 170A / 3600W
Secondary Output
12.3V / 12A
Input Voltage
200–240 VAC, 47–63 Hz
Power Factor
>0.99 (full load)
Ripple & Noise
<1 %
Protections
OCP (180–230 A), SCP, OTP, low-voltage input
Dimensions
249 × 250 × 48.5 mm
Weight
3.2 kg
Noise
67 dBA
Compatibility
Antminer S17+, T17+, S17e, T17e
Condition
New
Related Antminer S17 / T17 Power Supplies & Accessories
🇺🇸🇪🇺 USA & European Union (DDP): Orders are delivered DDP. All customs duties, import taxes, and fees are included — no additional charges on delivery.
🌍 Rest of world: Orders ship from China. Depending on your country, local customs authorities may apply import duties or taxes.
Get dedicated B2B pricing on this part and across our full catalog —
quote response within 24 hours, payment by T/T USD bank wire,
and DDP delivery available for US & EU customers (and other lanes on request).
Volume tiers
DDP for US & EU
T/T USD wire
24h response