Elphapex DG1+ 14G Water Cooling Plate Upgrade Kit

ElphaPex DG1+ 14G Water Cooling Plate Upgrade Kit | Aluminum Block with Internal Flow Channels for Air-to-Hydro Conversion

The ElphaPex DG1+ 14G Water Cooling Plate Upgrade Kit converts the air-cooled DG1+ 14G Litecoin / Dogecoin miner into a water-cooled system. The aluminum cooling plates mount onto the hashboards and carry away heat through internal flow channels — keeps junction temperatures stable under extended mining sessions and unlocks the noise reduction and density benefits that come with hydro cooling.

Built from aluminum with internal flow channels sized for even coolant distribution across the hashboard surface. The plate sits in direct thermal contact against the ASIC chips, transferring heat into the circulating coolant. 10mm pneumatic quick-connect fittings and pipe caps ship with the kit — tool-free disconnect for service, leak prevention during install, and compatibility with standard 10mm coolant lines.

When to Install the DG1+ 14G Water Cooling Kit

• Air-to-hydro conversion on a DG1+ 14G — quieter operation, denser rack layout, lower ambient impact on the room.
• Replacing a damaged stock plate after a coolant event or impact — upgrade rather than patch the original.
• Multi-miner hydro farm deployment — equip new DG1+ units with the hydro plate at intake before they hit the rack.
• Lowering long-term thermal stress on the ASIC chips — sustained lower junction temperatures extend hashboard life vs sustained near-throttle air cooling.
• Facility cooling consolidation — moving compute heat into a centralised water loop instead of in-rack air handling.

ElphaPex DG1+ 14G Water Cooling Plate Specifications

FAQ — DG1+ 14G Water Cooling Plate

Q: What other equipment do I need for the hydro conversion?
A: An external coolant pump, radiator, reservoir and coolant lines sized for 10mm fittings. The kit covers the in-miner plate and fittings; the facility-side loop is sourced separately. Test the loop for leaks before powering the miner on.

Q: Will this kit fit the standard DG1 (non +) as well?
A: This kit is specifically rated for the DG1+ 14G variant. The standard DG1 has different hashboard geometry and needs a different plate. Confirm your miner model before ordering.

Q: What thermal compound should I use between the ASIC chips and the plate?
A: A high-conductivity silicone thermal grease (6 W/m·K or higher) — see the related products list. Apply a thin even layer, mount the plate firmly, and torque the retention hardware evenly to avoid uneven contact pressure.

Q: Bulk pricing for multi-miner conversions?
A: Yes — email contact@lys-sz.com with your DG1+ count and we'll send case-quantity pricing.

Related products

• ElphaPex DG1 / DG1+ Brand New Control Board
• ElphaPex FP-101 PSU – DG1 4000W
• ElphaPex DG1 Power Cord – C20 to 2×C19 Splitter
• HY206 / HY236 6W/m·K Thermal Grease 1kg

Farm operators converting DG1+ fleets to hydro? Email contact@lys-sz.com for bulk pricing on the cooling plate + thermal grease + control board package. Worldwide shipping from our Shenzhen warehouse.