T9 T9+ PCB 18pin to 24pin Adapter Board for Antminer Test Fixture
Couldn't load pickup availability
Have questions about this product? Our team is here to help — just reach out on WhatsApp.
💬 Contact Us on WhatsAppAbout the Product
T9 / T9+ PCB 18-Pin to 24-Pin Adapter Board for Test Fixture
This high-quality T9+ adapter board is specifically designed to connect the Antminer test fixture and the T9+ hashboard. Function: connect the test fixture and send the data accurately to the hashboard for chip scan diagnostics.
The T9+ adapter board has a total of four interfaces — three connected to the test fixture, the fourth connects to the T9+ hashboard. Bridges the pinout mismatch between the standard test fixture's 18-pin interface and the T9+ hashboard's 24-pin connector. Essential tool for any repair shop servicing the T9 / T9+ generation.
Typical Use in T9+ Repair
- Hashboard chip scan — diagnosing failed BM1387 chips on T9+ hashboards.
- Test fixture compatibility — bridges standard fixture to T9+ pinout.
- Production refurbishment — bulk adapter inventory for T9+ rework lines.
- Hashboard diagnostic workflow — required step before chip-level rework.
T9 / T9+ Adapter Board Specifications
| Feature | Specification |
|---|---|
| Name | T9 / T9+ Adapter Board (Hashboard Scanning Device) |
| Category | Adapter / PCBA |
| Pinout Conversion | 18-pin (test fixture side) to 24-pin (T9+ hashboard side) |
| Interface Count | 4 interfaces — 3 to test fixture + 1 to T9+ hashboard |
| Compatible Hashboard | Antminer T9 / T9+ |
| Function | Data transmission between test fixture and hashboard |
| Condition | New |
FAQ — T9 / T9+ Adapter Board
Q: Why do I need an adapter board for test fixture compatibility?
A: Standard Antminer test fixtures use an 18-pin interface designed for newer-generation hashboards. The T9 / T9+ hashboard uses a 24-pin connector from the older generation. The adapter board translates between the two pinouts, allowing one test fixture to support multiple hashboard generations.
Q: Will it work on T9 (non-Plus)?
A: The adapter is designed for the T9+ specifically — its 24-pin pinout matches the T9+ board. The base T9 may have a slightly different pinout. Verify by physically comparing your hashboard connector to the adapter side before ordering.
Q: Do I need a specific test fixture model?
A: Most generic Antminer hashboard test fixtures with standard 18-pin output will work with this adapter. For specific test fixture compatibility questions, contact us with your fixture model.
Q: Bulk pricing for T9 / T9+ repair shops?
A: Yes — email contact@lys-sz.com with your fleet maintenance volume for tier pricing on multi-adapter orders.
Related products
- Antminer BM1366 ASIC Chip Test Fixture
- Universal Hashboard Test Fixture – S19 / S21 / T21
- Whatsminer Signal Cable 16p-18p – M20 / M30 Test Fixture
- K9 ASIC Multifunctional Tester – Hashboard + PSU
T9 / T9+ repair shops stocking adapter boards by the case? Email contact@lys-sz.com for bulk pricing. Worldwide shipping from our Shenzhen warehouses.
Buying in bulk for a mining farm or repair shop?
Get dedicated B2B pricing on this part and across our full catalog — quote response within 24 hours, payment by T/T USD bank wire, and DDP delivery available for US & EU customers (and other lanes on request).
