Test Fixture Bitmain Data Cable 2x9pin 18-pin 60cm Antminer

Bitmain Antminer Test Fixture Data Cable – 18-Pin 60cm

The Bitmain test fixture data cable is an 18-pin (2 × 9-pin) ribbon data cable connecting the Antminer control board to the hashboard on the bench during chip-scanning / diagnostic operations. The 60 cm length gives practical flexibility for repair bench layouts.

Build: PVC insulation + high-grade copper conductors for clean signal transmission and long service life. Each mining machine requires 3 of these cables (one per hashboard slot) — order the matching quantity for full diagnostic coverage of a 3-board miner.

Typical Use Cases

• Antminer test fixture bench setup — connect hashboards for chip-scanning diagnostics.
• Field-failed board recovery — diagnose chip chain before deciding repair scope.
• Production refurbishment — bulk cable inventory for repair stations.
• Spare bench inventory — common-failure consumable on busy lines.

Bitmain Test Fixture Cable Specifications

FAQ — Bitmain Test Fixture Cable

Q: How many cables per miner?
A: 3 cables — one per hashboard slot on a standard 3-board Antminer. Order matching quantity to cover all slots simultaneously on the bench.

Q: Works with Whatsminer test fixtures?
A: No — different pinout (Whatsminer uses 14-pin). Brand-specific cables required.

Q: Bulk pricing?
A: Yes — email contact@lys-sz.com.

Related products

• Whatsminer 14-pin Test Fixture Cable
• Innosilicon Test Fixture Cable – 14-pin 60 cm
• Universal Antminer Hashboard Test Fixture – S19 / S21 / T21
• Whatsminer M60 / M50 / M30 Test Fixture

Antminer repair shops stocking Bitmain test fixture cables? Email contact@lys-sz.com for bulk pricing. Worldwide shipping from our Shenzhen warehouses.