UP1542S Synchronous Rectified Buck Controller – Hashboard PCB Replacement IC
The UP1542S (UP1542SSU8) is a synchronous rectified buck controller in an SOP-8 package, designed to step down 5 V or 12 V input rails to outputs as low as 0.6 V. On ASIC miner hash boards it drives the local step-down converter that feeds power to groups of hashing chips. When this controller fails, its downstream ASIC string loses its supply rail and drops out of the hash chain — often appearing as a block of consecutive dead chips on a test-fixture scan rather than a single failed ASIC.
Distinguishing a Controller Fault from a Chip Fault
If a test fixture reports a contiguous group of failed chip positions (e.g. positions 12–18 all dead while 11 and 19 are fine), the fault is almost certainly in the power stage rather than in seven individual ASICs. Measure the output voltage at the inductor pad of the suspect buck converter: if the rail is absent or far below spec, the UP1542S controller is the primary suspect. A secondary check is to measure the switching waveform at the SW pin — a flat line confirms the controller is not switching.
Replacement Procedure
Remove the failed UP1542S with a soldering iron or hot-air station at 300–330 °C, taking care not to disturb the surrounding inductor and capacitors. Clean the eight pads, apply flux, and place the new IC observing pin-1 orientation. Solder by dragging a fine iron tip across the leads, then inspect under magnification for bridges — the 1.27 mm SOP-8 pitch is relatively forgiving. After replacement, power the board and verify the output voltage matches the original design value (typically 0.6–1.0 V depending on the ASIC family) before reinstalling in the miner.
🇺🇸🇪🇺 USA & European Union (DDP): Orders are delivered DDP. All customs duties, import taxes, and fees are included — no additional charges on delivery.
🌍 Rest of world: Orders ship from China. Depending on your country, local customs authorities may apply import duties or taxes.
Get dedicated B2B pricing on this part and across our full catalog —
quote response within 24 hours, payment by T/T USD bank wire,
and DDP delivery available for US & EU customers (and other lanes on request).
Volume tiers
DDP for US & EU
T/T USD wire
24h response