18-Pin Data Cable for Antminer and Iceriver - 20cm 30cm 60cm

18-Pin Signal & Test Fixture Data Cable – Antminer & IceRiver (20cm / 30cm / 60cm)

This 18-pin data cable serves as both a signal cable for in-chassis control-to-hashboard connections and a test fixture cable for bench diagnostics. Available in 20cm, 30cm and 60cm lengths to suit chassis routing or bench work. Compatible with a wide range of Antminer models (L9, S21, S21 XP, T21, KS5, S19j XP, S19K Pro and more) and IceRiver miners (KS1, KS2, KS3, KS3L, KS5L). Minimum order 10 pieces.

Dual-Purpose Design

Inside the miner, the 18-pin cable carries all data, control and status signals between the control board and each hashboard. On the repair bench, the same cable connects an individual hashboard to a test fixture or known-good control board for chip scanning and fault isolation. Having the right length on hand eliminates cable-stretch issues in chassis routing and provides enough slack for comfortable bench work.

Installation

Align the 18-pin connectors with the control board and hashboard headers. Press firmly until the connector seats fully — a partially inserted cable causes intermittent data errors and false chip failures. For bench testing, connect one end to the test fixture and the other to the hashboard under test.

18-Pin Signal Cable Specifications

Related Data Cables & Test Fixture Accessories

• 18-Pin Test Fixture Data Cable 60cm – Bitmain Antminer
• Whatsminer Signal Cable 14P–18P – M20 / M30 Test Fixture
• Avalon / Canaan Test Fixture Data Cable 14P 60cm
• Goldshell 18-Pin Data Cable – Goldshell / Antminer

Stocking data cables for a repair shop? Contact us at contact@lys-sz.com for bulk orders with mixed lengths.

Worldwide shipping from our Shenzhen warehouse.