C13 to C14 Power Cord - Stable Connection for Antminer Crypto Miner and PDU

C13 to C14 Power Cord 150cm | 3×2.5mm² Oxygen-Free Copper, PVC Heat-Resistant Insulation for Stable, Durable Connection Between ASIC Crypto Miners (Antminer / Iceriver) and PDU / IEC Power Strips in Mining Farm Deployments

The C13-to-C14 power cord is a foundational accessory for stable, secure power delivery in any mining farm — the connection between your ASIC miner's IEC inlet and your rack PDU outlet. C13 plug connects to the miner side (most Antminer, Whatsminer, Avalon, and Iceriver units expose a C14 inlet that mates with this plug). C14 plug connects to the PDU outlet. Together they form the most-replicated cable in your facility — and the most failure-prone if you cut corners on cable spec.

Built around a 3×2.5mm² oxygen-free copper conductor for low resistance and high current capacity — sized appropriately for sustained ASIC loads. Cable jacket is PVC heat-resistant material rated for the warm operating environments characteristic of dense mining facility racks. 1.5 m (150 cm) length is the standard rack-to-miner reach. Pure copper anti-oxidation core delivers corrosion resistance for years of unbroken service, even in humid or dust-prone facility conditions.

When to Order C13/C14 Power Cords

• New facility build-out — sized inventory of cables per rack per miner.
• Existing cord replacement — visible jacket damage, intermittent power, or discoloration at plug ends.
• Capacity expansion — additional miners arriving need additional cords.
• Cord-quality upgrade — replacing under-spec cables with proper 2.5mm² copper rating.
• Spare inventory — stocking spares for rapid swap during incident response.

C13 to C14 Power Cord Specifications

FAQ — C13/C14 Power Cord

Q: Why 2.5mm² and not 1.5mm²?
A: 2.5mm² copper handles ~16A continuous safely with low voltage drop. 1.5mm² is borderline at 13A continuous and shows higher resistance / heat under sustained ASIC load. Spending the extra cents per cord on the larger gauge pays back in fewer thermal incidents and more headroom for future higher-power miners.

Q: Will this work with US miners (NEMA plugs)?
A: This cord has C13/C14 ends, designed for IEC PDUs (common in EU / international facilities and increasingly in US datacenter racks). For US miners with NEMA plugs (5-15P / L5-30 / L6-20), you need a NEMA-to-C14 cord instead. Check your facility's PDU outlet type before ordering.

Q: Bulk pricing for full-facility cable orders?
A: Yes — email contact@lys-sz.com with your miner count and rack layout for tier pricing on facility-scale cable orders. Multi-pallet shipments handled directly from our warehouses.

Q: What about hot temperatures? Will the jacket melt?
A: The PVC heat-resistant jacket is rated for warmth-tolerant operation typical of mining facility ambient temperatures. For elevated-ambient deployments (immersion-adjacent, high-density hot aisles) consider higher-temp-rated alternatives — contact us for spec recommendations.

Related products

• Whatsminer C19 to EU Schuko Power Cord 16A
• NEMA L7-10P to P13 AC Power Cord 30A 277/415V
• C19 Female Power Socket 250A IEC320
• 5557 6-pin Power Connector Shell

Mining farm operators or installers stocking C13/C14 cords by the pallet? Email contact@lys-sz.com for bulk pricing. Worldwide shipping from our Shenzhen warehouses.