C20 to 2X C13 Splitter Power Cord 250V for Antminer S17 S19 to PDU

C20 to 2×C13 Splitter Power Cord – Heavy-Duty PDU Cable for Antminer S17 / S19 Series

This IEC C20 to 2×C13 splitter power cord connects a single PDU output to two devices simultaneously — splitting power from a C20 male plug into two C13 female connectors. The main cable uses 16AWG (1.5mm²) SJTW construction while the splitter branches use 18AWG (0.75mm²), rated at 100–250V up to 16A per branch. Length 1.5m (5ft). Compatible with Antminer L7, S19, S19 Pro, S19J, S19J Pro, S17 and T17 series miners.

When to Use a Splitter Cord

In dense rack environments, PDU outlets are limited. A C20-to-2×C13 splitter lets you power two low-wattage devices — such as a miner's control board PSU and a monitoring device — from a single PDU socket. For high-wattage miners drawing the full capacity of the cord, verify that the total current across both branches does not exceed the main cable's rating to avoid overheating.

Installation

Plug the C20 male end into the PDU outlet. Connect each C13 female end to the device's power inlet. Ensure both C13 connections are fully seated — a partially inserted connector will arc under load. Route the cable to avoid sharp bends at the splitter junction where mechanical stress is highest.

C20–2×C13 Splitter Cord Specifications

Related Power Cords & PDU Cables

• C13 Splitter Cable – Antminer S19
• C13–C20 Power Cord – Antminer PSU
• S21 / S19j XP Power Cord – APW17 PSU to PDU
• C13–C14 Power Cord – Antminer PDU

Cabling a mining facility? Contact us at contact@lys-sz.com for splitter cords, PDU cables and power distribution accessories. Worldwide shipping from our Shenzhen warehouse.