F8 Mini Turbo Fan 130,000 RPM for Dust Cleaning with Adjustable Speeds

F8 Mini Turbo Fan | Cordless 130,000 RPM Brushless Dust-Cleaning Blower with 8000 mAh Battery, Type-C Charging and 4 Adjustable Speed Settings for ASIC Hash Board / Control Board / Power Supply Maintenance and Electronics Repair Bench Cleaning

The F8 Mini Turbo Fan is the cordless dust-cleaning blower that should sit on every ASIC mining repair bench — your ultimate solution for efficient dust cleaning on electronic circuit boards, fans, cases, and PSUs. Equipped with a powerful brushless motor running at 130,000 RPM, it delivers strong, stable, high-pressure airflow that compressed-air cans can't match for sustained cleaning sessions.

Built for repair-bench duty: four adjustable wind speed levels let you dial in the right air pressure for each task — full power for dense ASIC heatsink fins, low setting for delicate control board components. Type-C charging interface with charging protection + 8000 mAh battery deliver long-lasting cordless performance — no compressed air canisters to swap mid-job. Built-in safety features include automatic shutdown when core temperatures exceed 150°C to prevent overheating during continuous use. Perfect for maintaining hash boards, control boards, and power supplies across Antminer / Whatsminer / Avalon / Iceriver fleets.

Typical Use in Mining Repair Workshop

• Dust removal from hashboards — between heatsink fins, around connectors, behind chip arrays.
• PSU interior cleaning — accumulated dust on fan blades and transformer cores reducing thermal performance.
• Control board cleaning — dust accumulation in connector pins causing intermittent contact.
• Repair-bench surface cleaning — debris removal after soldering and rework operations.
• Pre-thermal-imaging prep — clean boards before IR camera inspection for accurate hot-spot detection.

F8 Mini Turbo Fan Specifications

FAQ — F8 Mini Turbo Fan

Q: Why a turbo fan vs compressed air can?
A: Compressed air cans cost $5-15 per can and run out in 10-15 minutes of use, leaving cold residue when used too long. The F8 is cordless, rechargeable, never runs out mid-job, and delivers more sustained airflow at full power than canned air. Pays for itself within 10-20 uses for any active repair bench.

Q: How long does a charge last?
A: Maximum battery life depends on speed setting. On full power (130,000 RPM), expect roughly 15-25 minutes of continuous use. On lower settings, 1-2+ hours. The 8000 mAh battery + Type-C fast charging means quick top-ups between major cleaning sessions.

Q: Is it safe for sensitive electronics?
A: Yes — air pressure only, no liquid, no static buildup from compressed gas. The brushless motor is dust-tolerant. Use the lower speed settings near delicate components (electrolytic caps, fragile connectors) and full power on heatsink fins and heavy debris areas.

Q: Bulk pricing for repair shops outfitting multiple benches?
A: Yes — email contact@lys-sz.com with your bench count for tier pricing on multi-unit orders for repair workshop equipment.

Related products

• ANLIXIN-862D 2-in-1 Desoldering Station
• QUICK 885 Hot Air Gun 1800W – ASIC Repair
• Sunshine SL-936D Anti-Static 80W Soldering Iron
• T-8280 IR Preheating Station 1600W

Repair shops outfitting multiple benches with the F8? Email contact@lys-sz.com for bulk pricing. Worldwide shipping from our Shenzhen warehouses.