HS8038SL 8038 AC Fan 80×80×38mm Aluminium – 110V / 220V / 380V 50/60Hz
Couldn't load pickup availability
Have questions about this product? Our team is here to help — just reach out on WhatsApp.
💬 Contact Us on WhatsAppAbout the Product
HS8038SL 8038 AC Cooling Fan – Aluminium Frame, 110V / 220V / 380V
The HS8038SL is an 80×80×38mm AC axial cooling fan with an aluminium frame, an oil-impregnated sleeve bearing and two bare lead wires for direct connection to the mains. It runs straight from AC power at 50/60Hz, with no driver board or DC power supply required.
It is available in three voltage versions, 110V, 220V and 380V, so you can match the fan to the supply already present in your cabinet or equipment. The 110V version is rated 0.10A. The 80×80mm footprint with four corner mounting holes and 38mm depth is the standard 8038 format, which makes it a drop-in replacement for a failed 8038 AC fan of the same voltage.
Signs Your 8038 AC Fan Needs Replacing
- Grinding, rattling or whining noise from the bearing.
- Slow start-up, or the fan needs a push to begin turning.
- Blades turning noticeably slower than before, with weaker airflow.
- Fan stopped completely while the equipment is powered.
- Rising temperature inside the cabinet or enclosure it cools.
Installation Notes
Before ordering, read the label of the old fan: the replacement must have the same voltage (110V, 220V or 380V) and the same 80×80×38mm size. Never connect a 110V fan to a 220V or 380V supply. Switch off and isolate the power, disconnect the two lead wires, then unscrew the old fan from its four corner holes. Mount the HS8038SL with the same airflow direction as the original, reconnect the two wires to the AC supply, and check that the fan starts smoothly and runs quietly before closing the equipment.
HS8038SL Specifications
| Parameter | Value |
|---|---|
| Part Number | HS8038SL |
| Fan Type | AC axial cooling fan |
| Dimensions | 80×80×38mm (8038) |
| Voltage Versions | 110V AC / 220V AC / 380V AC |
| Rated Current (110V version) | 0.10A |
| Frequency | 50/60Hz |
| Frame Material | Aluminium |
| Bearing Type | Sleeve bearing (oil-impregnated) |
| Connection | 2 lead wires |
| Mounting | 4 corner holes, standard 80mm pattern |
| Label Markings | CE, RoHS, UL Recognized component mark |
| Condition | New |
FAQ
Which voltage version should I order?
The one printed on the label of the fan you are replacing, or the AC voltage that powers the fan's position. The 110V, 220V and 380V versions are not interchangeable.
Does the HS8038SL need a DC power supply or a controller?
No. It is an AC fan and connects directly to the AC supply through its two lead wires, at 50Hz or 60Hz.
Will it fit in place of another 8038 AC fan?
Yes, if the old fan is also 80×80×38mm with corner mounting holes and runs on the same voltage. Measure the frame depth: an 8025 fan is only 25mm deep.
What is the current draw of the 220V and 380V versions?
The 110V version is rated 0.10A. For the 220V and 380V ratings, email us and we will confirm them before you order.
Related Fans & Cooling Parts
- GW280H2C-L02 220V AC Metal Fan 280×280×80mm – Bitmain Antrack V1 Hydro
- 1100mm Negative Pressure Fan 220V/380V – Mining Farm Ventilation
- DA08025B12UG 80mm PSU Cooling Fan – Whatsminer P21 Series
- AUB0812VH 80mm 12V PSU Cooling Fan – Goldshell
Need several HS8038SL fans or a specific voltage version? Email contact@lys-sz.com for volume pricing.
Worldwide shipping from our Shenzhen warehouses.
Buying in bulk for a mining farm or repair shop?
Get dedicated B2B pricing on this part and across our full catalog — quote response within 24 hours, payment by T/T USD bank wire, and DDP delivery available for US & EU customers (and other lanes on request).
