Iceriver KS5L KS5M Water Cooling Plate Kit for Enhanced Hydro Miner Performance

Iceriver KS5L / KS5M Water Cooling Plate Kit | Complete Air-to-Hydro Conversion for Iceriver Kaspa Miners

The Iceriver KS5L / KS5M Water Cooling Plate Kit converts an air-cooled KS5L or KS5M Kaspa miner into a water-cooled system. Delivers significantly improved heat dissipation, quieter operation, and more stable hash rates by replacing the stock air cooling with direct-contact water plates that extract heat from the hashboard surfaces far more efficiently than forced air.

Complete kit includes six corrosion-resistant aluminum cooling plates (3 front + 3 back), two water separators, 26 quick connectors, 12 corrugated bellows for thermal expansion and vibration absorption, 1 cover plate and 8 mounting screws — everything required for the conversion in-miner. Pump, radiator and reservoir are facility-side and sourced separately. Available in three configurations at checkout: front plates only (3 pcs), back plates only (3 pcs) or complete set (6 pcs) — pick by your installation scenario.

When to Install the KS5L / KS5M Cooling Kit

• Air-to-hydro conversion on KS5L / KS5M miners — quieter operation, denser rack layout, lower ambient impact.
• Noise-sensitive environments — water cooling eliminates the high-decibel KS5L fans, drops noise to the level of the external radiator + pump.
• Thermal stability across day / night ambient swings — coolant temperature is more stable than air, prevents the hash rate fluctuations that come with peak ambient temperatures.
• Multi-miner hydro farm deployment — equip new KS5L / KS5M units with the conversion at intake before they hit the rack.
• Facility cooling consolidation — move compute heat into a centralised water loop instead of rack-level air handling.

Iceriver KS5L / KS5M Cooling Kit Contents

FAQ — Iceriver KS5L / KS5M Cooling Kit

Q: What facility-side equipment do I need beyond the kit?
A: External pump sized to the loop's flow requirement, radiator with enough surface area to dissipate the miner's full thermal output, reservoir for coolant volume buffer, and coolant lines compatible with the kit's quick connectors. Test the loop for leaks before powering on.

Q: When should I order front-only or back-only vs the complete set?
A: For new conversions, the complete set is recommended (covers both sides of the hashboard). If you've already installed one side and need to complete the conversion, individual plate sets save cost. Verify your existing components are compatible before ordering single-side kits.

Q: Do I need a fan simulator after removing the stock fans?
A: Yes — the miner firmware expects tach signals from the fan headers. Without them the miner enters thermal protection. Pair the cooling kit with the Iceriver fan speed simulator (see related products).

Q: Bulk pricing for multi-miner conversions?
A: Yes — email contact@lys-sz.com with your KS5L / KS5M count and we'll send case-quantity pricing on the cooling kit + fan simulator bundle.

Related products

• Iceriver Fan Speed Simulator – RX0 / KS1 / KS2 / KS3 / KS5L
• Iceriver AL3 / KS5M Fan Speed Simulator
• Iceriver KS5L ASIC Chip Tinning Stencil + Holder
• Iceriver KS5L / KS5M Control Board – Square Fan Connector

Fleet operators converting KS5L / KS5M units to hydro? Email contact@lys-sz.com for bulk pricing on the cooling kit + fan simulator + control board bundle. Worldwide shipping from our Shenzhen warehouse.