ICT560 ASIC Chip for Goldshell LT5 PRO Hashboard Repair

ICT560 ASIC Chip | Drop-In Replacement IC for Goldshell LT5 / LT5pro Hashboard Repair

The ICT560 is the hashing ASIC chip used on Goldshell LT5 and LT5pro hashboards. Each chip is a single point in the long serial chain that runs the length of the hashboard — when one chip fails, the chain reports incomplete and the affected hashboard drops to a low or zero hashrate. Swap the failed chip out, reflow the chain, and the board returns to normal duty.

Direct drop-in replacement — same package, same pinout, same electrical envelope as the chip originally fitted at the factory. Stocked in volume for repair shops servicing LT5 fleets and individual miners replacing failed chips at the bench.

When to Replace the ICT560

• Hashboard reports low or zero hashrate — chip chain incomplete on one board while other boards run normally.
• Chip count mismatch in the chain scan — diagnostic tool flags the failing position.
• Visible damage on a chip — burnt, cracked, or delaminated package after thermal stress or transient event.
• Single-board failure after a known fault event — short, power surge, or thermal runaway likely killed one or more chips along the chain.

ICT560 ASIC Chip Specifications

FAQ — ICT560 ASIC Chip

Q: How do I identify which chip in the chain failed?
A: Use the Goldshell test fixture for LT5 hashboards — it scans the serial chain and reports the position of the first failure. Once the failing position is known, locate that physical chip on the board, desolder, and fit a fresh ICT560 in its place.

Q: ICT560 vs LT5 standard vs LT5pro — same chip across all?
A: Yes — the ICT560 is used on both LT5 and LT5pro hashboards. Match the silk marking on the chip you're replacing as a final confirmation.

Q: Rework profile?
A: Standard hot-air rework with flux paste. Preheat the board to 100°C before applying hot air, peak around 320°C with controlled dwell time. A precision tin tool / stencil for the ICT560 footprint makes chip placement repeatable across multiple repairs.

Q: Bulk pricing for repair shops?
A: Yes — email contact@lys-sz.com for volume pricing on ICT560 chip stock and matched tin tool kits.

Related products

• Goldshell LT5 / LT5pro Control Board
• Goldshell Test Fixture (HS5 / CK5 / CK6 / KD5 / KD6 / LT5)
• Goldshell 18pin Data Cable
• AUB0812VH Goldshell PSU Cooling Fan 80mm

Goldshell LT5 fleet operators stocking ICT560 chips by the tray? Email contact@lys-sz.com for bulk pricing. Worldwide shipping from our Shenzhen warehouse.