LM2904DR2G Dual Operational Amplifier for Whatsminer P21 Power Supply Repair
Couldn't load pickup availability
Have questions about this product? Our team is here to help — just reach out on WhatsApp.
💬 Contact Us on WhatsAppAbout the Product
LM2904DR2G Dual Operational Amplifier – Whatsminer P21 Power Supply Repair
The LM2904DR2G is a low-power dual operational amplifier designed for single-supply operation from 3V to 32V, used in the Whatsminer P21 power supply for voltage regulation feedback, current sensing and signal conditioning. It features low input bias current, an input common-mode range that includes the negative supply rail, integrated ESD clamp protection and continuous short-circuit protection on the output. SMD package for direct board-level replacement.
Role in the P21 Power Supply
Op-amps in a mining PSU sit in the feedback and protection loops — they compare the output voltage against a reference, amplify error signals for the PWM controller, and condition current-sense signals for the overcurrent protection circuit. A failed LM2904 causes the feedback loop to lose regulation, resulting in output voltage drift, oscillation or complete PSU shutdown. Because both amplifier channels are in the same package, a single failure can disable two independent feedback paths simultaneously.
Replacement Procedure
Disconnect mains and discharge capacitors. Locate the LM2904DR2G on the secondary-side feedback/control board of the P21 PSU. Desolder the SMD package, clean pads, install the new device with pin 1 aligned and reflow. Power through a variac and verify stable output voltage under progressive load, confirming the feedback loop is regulating correctly.
LM2904DR2G Op-Amp Specifications
| Parameter | Value |
|---|---|
| Part Number | LM2904DR2G |
| Channels | Dual |
| Supply Voltage | 3V – 32V (single supply) |
| Differential Input | ±32V DC |
| ESD Protection | Integrated input clamp |
| Output Protection | Continuous short-circuit |
| Compatibility | Whatsminer P21 PSU |
| Condition | New |
Related Whatsminer P21 PSU Components
- DA08025B12UG 80mm Fan – P21 PSU Cooler
- Whatsminer P21 PSU Transformer
- Whatsminer P21 PSU 3300W – Complete Unit
- Whatsminer P21D PSU 3300W
Repairing P21 power supplies? Contact us at contact@lys-sz.com for op-amps, controllers and all PSU repair ICs.
Worldwide shipping from our Shenzhen warehouse.
Buying in bulk for a mining farm or repair shop?
Get dedicated B2B pricing on this part and across our full catalog — quote response within 24 hours, payment by T/T USD bank wire, and DDP delivery available for US & EU customers (and other lanes on request).
