Whatsminer P739A Power Supply – Compatible with M60 M60S M60S+
Couldn't load pickup availability
Have questions about this product? Our team is here to help — just reach out on WhatsApp.
💬 Contact Us on WhatsAppAbout the Product
Whatsminer P739A Power Supply – 4,800 W PSU for M60 / M60S / M60S+
Keep your latest-generation Whatsminer M60 series running at full hash rate with the factory-specified P739A-BC-16-5000-A-V00 power supply. It accepts 220–277 VAC at up to 27 A and delivers a 16 V / 300 A (4,800 W) main rail for the hash boards plus a dedicated 12 V / 15 A auxiliary rail for the control board and fans. All connector pinouts, cable lengths, and mounting holes match the M60 chassis — no adapters or modifications needed.
Diagnosing a Failing Whatsminer PSU
Common symptoms include the miner refusing to power on, fans spinning briefly then stopping, or the firmware logging undervoltage errors on the hash-board rail. Before ordering a replacement, verify that mains voltage is within the 220–277 V input range and that the upstream breaker or PDU is not tripping. If mains checks out, measure the standby voltage at the 12 V auxiliary output — if it is absent or below 11 V, the PSU's primary side has likely failed and the unit needs replacement.
Installation and First-Boot Checklist
Disconnect mains and wait 60 seconds for internal bulk capacitors to discharge. Remove the old PSU, slide the P739A into position, secure mounting screws, and reconnect all hash-board power cables and the control-board cable. Before connecting mains, inspect all connectors for full engagement — a partially seated connector under 300 A load will overheat rapidly. On first boot, monitor the miner dashboard for stable 16 V readings and confirm the hash rate ramps to its rated level within the first five minutes.
P739A PSU Specifications
| Parameter | Value |
|---|---|
| Model | P739A-BC-16-5000-A-V00 |
| Input Voltage | 220–277 VAC, 50/60 Hz |
| Max Input Current | 27 A |
| Main Output | 16 V DC / 300 A (4,800 W) |
| Auxiliary Output | 12 V DC / 15 A |
| Compatibility | Whatsminer M60, M60S, M60S+ |
| Condition | New (original) |
Related Whatsminer M60 Parts & PSU Components
- KF1980E ASIC Chip – M60 / M60S Hashboard
- Whatsminer M60/M50/M30 Hashboard Tester
- M60S 1.2 V LDO Chip – Hashboard Repair
- M50/M60 Test Fixture – ASIC Chip Scanning
Need P739A power supplies for a fleet of M60 miners? Contact us at contact@lys-sz.com for volume pricing.
Worldwide shipping from our Shenzhen warehouse.
Buying in bulk for a mining farm or repair shop?
Get dedicated B2B pricing on this part and across our full catalog — quote response within 24 hours, payment by T/T USD bank wire, and DDP delivery available for US & EU customers (and other lanes on request).
