R4-14038-64PK-B1 Ebit E9 E10 14038 140x140x38mm Cooling Fan DC 12V 4.0A 4p
Couldn't load pickup availability
Have questions about this product? Our team is here to help — just reach out on WhatsApp.
💬 Contact Us on WhatsAppAbout the Product
R4-14038-64PK-B1 140mm Cooling Fan for Ebit E9 / E10 Miners
The R4-14038-64PK-B1 cooling fan is a vital component for Ebit E9 / E10 miners, specifically designed to manage airflow and maintain optimal operating temperatures. By effectively dissipating heat, this cooling fan helps prevent overheating, potential damage, and system failure across continuous 24/7 mining operation.
With a size of 140 × 140 × 38 mm, this fan fits the Ebit E9 / E10 chassis directly. Operates at rated 12V DC and 4.0A rated current for efficient cooling performance. Features a 4-pin mini connector for easy installation. The fan's design takes air in through the front and pushes it out at the rear — effectively maintaining airflow through the miner's heatsink array.
Typical Use in Ebit E9 / E10 Repair
- Failed fan bearing — audible bearing noise indicates worn fan ready for replacement.
- Throttling recovery — restoring proper airflow after fan failure causes thermal throttling.
- Pre-emptive maintenance — replacing aging fans before failure during scheduled service.
- Fleet sustainment — Ebit fleet operators stocking fan spares.
- Repair shop inventory — common-failure part for Ebit-servicing repair shops.
R4-14038-64PK-B1 Specifications
| Feature | Specification |
|---|---|
| Part Number | R4-14038-64PK-B1 |
| Product Category | Cooling Fan |
| Size | 140 × 140 × 38 mm |
| Rated Voltage | DC 12V |
| Rated Current | 4.0A |
| Power Consumption | ~3W idle, scales with load |
| Connector | 4-pin mini connector |
| Airflow Direction | Front intake, rear exhaust |
| Compatible Miners | Ebit E9 / E10 |
| Condition | Brand New |
FAQ — R4-14038-64PK-B1 Cooling Fan
Q: Will it fit other Ebit models (E11 / E12)?
A: The 140 × 140 × 38 mm form factor is standard across multiple Ebit generations. Verify physical dimensions and connector geometry against your existing fan before ordering. The 4-pin mini connector spec should match across E9 / E10 / E11 / E12.
Q: How often should I replace the fan?
A: Ball-bearing fans typically last 30,000-50,000 hours of 24/7 operation — roughly 3.5-5.7 years. For mining utilization, plan replacement at first sign of bearing noise or every 2-3 years pre-emptively.
Q: Can I substitute a generic 140mm fan?
A: Generic 140mm fans with 4-pin headers may physically fit, but RPM curves and connector pinout may differ. The OEM-spec R4-14038-64PK-B1 preserves Ebit's thermal envelope. For best results, stick with OEM-spec.
Q: Bulk pricing for Ebit fleet operators?
A: Yes — email contact@lys-sz.com with your fleet size for tier pricing on multi-fan orders.
Related products
- Ebit E12 Control Board (44Th/s BTC)
- Ebit E12 PSU YBH332S12+RS485 3300W
- QFR1212GHE 120mm Cooling Fan – Antminer L3+ / S9
- FFB1212EHE 120mm Cooling Fan – 12V / 3A / 4500 RPM
Ebit fleet operators stocking R4-14038 fans by the case? Email contact@lys-sz.com for bulk pricing. Worldwide shipping from our Shenzhen warehouses.
Buying in bulk for a mining farm or repair shop?
Get dedicated B2B pricing on this part and across our full catalog — quote response within 24 hours, payment by T/T USD bank wire, and DDP delivery available for US & EU customers (and other lanes on request).
