Antminer S21 AC Power Cord P13 to EU Standard Plug 1.5m Bitmain APW17 Power Supply
Couldn't load pickup availability
Have questions about this product? Our team is here to help — just reach out on WhatsApp.
💬 Contact Us on WhatsAppAbout the Product
P13 to EU Standard Plug AC Power Cord for Antminer S21 / Bitmain APW17 PSU
The P13 to EU standard plug AC power cord is the input lead for the Bitmain APW17 PSU used on the Antminer S21 family. One end terminates in Bitmain's proprietary P13 4-pin AC plug that mates with the APW17 input socket; the other end is a European-spec mains plug ready to drop into a standard EU wall outlet or PDU.
The cord ships at 1.5 meters length — enough flexibility to route between PDU and PSU in a typical home or small-farm deployment. For US-spec NEMA, UK-spec BS1363 or PDU C19/C20 terminations, see the related power cord variants below.
Specifications
| Parameter | Value |
|---|---|
| Part number / type | P13 to EU plug power cord |
| Condition | New |
| PSU-side connector | P13 4-pin (Bitmain APW17) |
| Wall-side plug | EU standard Schuko-class plug |
| Length | 1.5 meters (150cm) |
| Compatible PSU | Bitmain APW17 (1215a) |
| Compatible miners | Antminer S21, S19j XP and APW17-based models |
| Target market | EU / Schengen mains outlets |
| Insulation | Heat-resistant, flame-retardant PVC |
| Use case | Replacement input lead for APW17 PSU |
Compatibility
The PSU-side P13 plug is specific to Bitmain's APW17 input socket — it is not interchangeable with APW12 (which uses C20 / C19) or APW9 / APW8 input geometries. Verified compatible miners include Antminer S21, S21 Pro and S19j XP when paired with the APW17 1215a PSU. The EU plug end requires a standard 230V / 16A Schuko-class outlet.
Where the P13 cord fits
The P13 connector locks into the AC input socket on the back of the APW17 PSU. The EU plug end plugs into the wall socket or rack PDU. Because the APW17 can pull up to ~7A on a 230V circuit at peak hashing load, ensure the upstream socket and breaker are rated for at least 16A — undersized wiring is the most common cause of nuisance breaker trips on home Antminer setups.
Common failure symptoms
- Miner does not power on with mains live — broken conductor inside the cord
- Intermittent shutdowns under full hashing load due to a loose P13 plug
- Burn marks or melted plastic around the P13 plug housing
- EU plug pins overheat at the wall socket — undersized outlet, not the cord
- Ground pin damaged or missing — replace the cord immediately
Frequently asked questions
Does this cord fit the APW12?
No — the APW12 uses a C20 input, not P13. For APW12, use a C20-terminated cord such as the C20-C13 splitter or C19-C20 PDU lead.
Can I use this on an Antminer T21 / S21 XP?
The T21 typically ships with the P33 input, while the S21 XP uses APW17 (P13). Match the cord to the PSU input label on your specific unit.
What if I'm in the UK?
Use the UK-plug variant of the P13 cord linked below — the EU Schuko plug will not fit a BS1363 socket.
Can I extend this with a standard EU extension cable?
Yes, but only with a properly rated 16A extension. Avoid 10A "indoor" extensions, which will heat up under continuous mining load.
Related products
- Bitmain APW17 1215a PSU for Antminer S21 / S19j XP
- P13 Plug AC Power Cord for Antminer S21 / S19j XP
- P13 to UK Plug Power Cord for APW17 (Antminer S21)
- P13 to China-Standard Plug Power Cord for APW17
- P33 / P13 Power Cord for APW17 PDU Connection
Contact contact@lys-sz.com for volume pricing or compatibility questions.
Buying in bulk for a mining farm or repair shop?
Get dedicated B2B pricing on this part and across our full catalog — quote response within 24 hours, payment by T/T USD bank wire, and DDP delivery available for US & EU customers (and other lanes on request).
