H60T12BS13A7-01 60x25 PSU Cooling fan for Bitmain APW7 APW12 APW17
Couldn't load pickup availability
Have questions about this product? Our team is here to help — just reach out on WhatsApp.
💬 Contact Us on WhatsAppAbout the Product
H60T12BS13A7-01 60×60×25mm Nidec PSU Cooling Fan – Bitmain APW3 / APW7 / APW12 / APW17
The H60T12BS13A7-01 is a 60×60×25mm Nidec PSU cooling fan rated 12V / 0.64A with a 2-pin connector, used as the internal cooling fan inside Bitmain APW3, APW7, APW12 and APW17 power supplies. Once this fan slows or seizes, PSU internal temperatures climb fast and the unit either trips on overtemp or shortens the life of the secondary capacitors. Replacing the fan is a 10-minute job and restores the PSU to factory cooling spec.
Why This Specific Fan
Bitmain APW PSUs use a high-static-pressure 6025 fan to push air across the secondary side and rectifier heatsinks. The H60T12BS13A7-01 has the right airflow / static-pressure curve and the matching 2-pin connector — generic 60mm PC fans typically run at lower RPM, miss the connector pinout, and don't cool the PSU adequately under sustained 1500-3300W load.
Replacement Procedure
Disconnect the PSU from mains and wait 5 minutes for the bulk capacitors to discharge. Open the case (4-6 screws), unplug the original fan from the secondary-side header, remove the 4 fan screws, fit the new H60T12BS13A7-01 with the airflow arrow pointing the same direction as the original, and reconnect. Close the case, power on the PSU on the bench and confirm the fan spins at full speed within 1-2 seconds.
H60T12BS13A7-01 Specifications
| Parameter | Value |
|---|---|
| Model | H60T12BS13A7-01 (Nidec) |
| Dimensions | 60×60×25mm (6025) |
| Voltage | 12VDC |
| Current | 0.64A |
| Connector | 2-pin (standard PSU header) |
| Bearing | Dual ball bearing |
| Compatibility | Bitmain APW3 / APW7 / APW12 / APW17 |
| Operating Temp | -10°C to +70°C |
| Condition | New |
Related APW PSU Parts
- AFB0612EH 6025 Delta PSU Fan – APW3/APW7/APW12
- FD6025B12H 6025 Cooling Fan – APW3/APW7/APW12
- APW7 PSU 1800W – Antminer L3+ / S9
- 10-Pack PCI-E 6-Pin Cables – APW3/APW7
Repairing a fleet of APW3 or APW7 PSUs? Contact us at contact@lys-sz.com for fan + capacitor kit pricing. Worldwide shipping from our Shenzhen warehouse.
Buying in bulk for a mining farm or repair shop?
Get dedicated B2B pricing on this part and across our full catalog — quote response within 24 hours, payment by T/T USD bank wire, and DDP delivery available for US & EU customers (and other lanes on request).
