Whatsminer AC Power Cord C19 Female to C20 Male 1.5m 14AWG 250V to PDU
Couldn't load pickup availability
Have questions about this product? Our team is here to help — just reach out on WhatsApp.
💬 Contact Us on WhatsAppAbout the Product
C19 to C20 AC Power Cord 1.5m – Heavy-Duty PDU Cable for ASIC Mining Equipment
This IEC C19 to C20 power cord is a 1.5 m (5 ft) heavy-duty cable rated at 250 V with 14 AWG conductors, designed to connect ASIC miners to Power Distribution Units (PDUs) in rack-mounted facilities. The C19 female end plugs into the miner's PSU inlet, while the C20 male end connects to the PDU output. The conductor gauge ensures minimal voltage drop across the run — critical when every fraction of a volt affects miner stability.
Why Cable Quality Matters in Mining
A facility with hundreds of machines drawing 2,000–5,000 W each stresses every power cable in the chain. An undersized cord develops resistive heating at the contacts and along the conductor, wasting energy and creating a fire risk. Over time, the heat softens the connector plastic and loosens pin contact pressure — a self-reinforcing failure loop. The most visible symptom is a warm or melted housing; the more insidious failure is a slight voltage drop that brownouts the PSU and reduces hash rate without triggering an alarm.
Installation Notes
Plug the C19 female connector firmly into the miner's PSU inlet until it seats fully. Connect the C20 male end into the PDU output socket. A partially-seated C19/C20 connection will arc under load. Route the cable to avoid sharp bends near the connectors, as repeated flexing at the strain relief can break internal conductors. In dense rack environments, use cable management ties to keep cords organised and prevent them from obstructing airflow.
C19–C20 Power Cord Specifications
| Parameter | Value |
|---|---|
| Connector A | IEC C19 (female) |
| Connector B | IEC C20 (male) |
| Length | 1.5 m (5 ft) |
| Wire Gauge | 12/14 AWG |
| Voltage Rating | 250 V |
| Condition | New |
Related Power Cords & PDU Connectors
- C20–C19 Splitter Cable – Elphapex DG1 / ASIC Miner PDU
- Avalon 1446 / 1466 / 1566 Power Cord PDU C20
- C19 Female Power Socket Connector – Whatsminer / Avalon PDU
- Antminer S21 / S19j XP Power Cord – APW17 PSU PDU
Cabling a mining facility? Contact us at contact@lys-sz.com for bulk C19–C20 cords and PDU connectors.
Worldwide shipping from our Shenzhen warehouse.
Buying in bulk for a mining farm or repair shop?
Get dedicated B2B pricing on this part and across our full catalog — quote response within 24 hours, payment by T/T USD bank wire, and DDP delivery available for US & EU customers (and other lanes on request).
