The VIS30010 is a high-performance N-channel MOSFET rated at 30V with ultra-low Rds(on), used on the Antminer L7 hashboard as a power switching device for the ASIC chip voltage domains. Its low on-state resistance minimises conduction losses and heat generation, which is critical on the densely packed L7 board where thermal margin is tight. New original component with enhanced heat dissipation characteristics.
Why Low-Rds(on) MOSFETs Matter on L7 Hashboards
The L7 hashboard runs hundreds of BM1491 ASIC chips, each drawing current through MOSFETs that switch and distribute power across chip groups. Every milliohm of Rds(on) translates directly to watts of heat at the high currents involved. A MOSFET with degraded or excessive on-resistance reduces the voltage reaching its chip group, causing hash rate drop and chip errors. The VIS30010's ultra-low resistance keeps voltage drop and thermal dissipation to a minimum, maintaining stable chip operation.
Replacement Procedure
Remove the hashboard and identify the failed VIS30010 near the affected voltage domain. Verify failure with a multimeter — check drain-source resistance and gate threshold. Desolder with hot air, clean pads with flux and solder wick, place the new device with correct pin orientation and reflow. After installation, verify drain-source resistance is within specification and reinstall the board. Confirm full chip detection and normal hash rate in the dashboard.
VIS30010 MOSFET Specifications
Parameter
Value
Part Number
VIS30010
Channel Type
N-Channel
Drain-Source Voltage
30V
Rds(on)
Ultra-low
Compatibility
Antminer L7 hashboard
Condition
New
Related Antminer L7 Hashboard MOSFETs & Components
🇺🇸🇪🇺 USA & European Union (DDP): Orders are delivered DDP. All customs duties, import taxes, and fees are included — no additional charges on delivery.
🌍 Rest of world: Orders ship from China. Depending on your country, local customs authorities may apply import duties or taxes.
Get dedicated B2B pricing on this part and across our full catalog —
quote response within 24 hours, payment by T/T USD bank wire,
and DDP delivery available for US & EU customers (and other lanes on request).
Volume tiers
DDP for US & EU
T/T USD wire
24h response