AC Power Cord C13 Extension to EU Plug 3x2.5mm - ASIC Power Supply
Couldn't load pickup availability
Have questions about this product? Our team is here to help — just reach out on WhatsApp.
💬 Contact Us on WhatsAppAbout the Product
AC Power Cord C13 to EU Plug — 1.5m 3x2.5mm² Heavy-Duty for ASIC PSU
This AC power cord pairs a EU Schuko standard male plug with a C13 female extension at the PSU end, on a 1.5m length of 3x2.5mm² heavy-duty cable. The cross-section handles continuous ASIC loads without thermal stress, while the standard C13 inlet makes it a drop-in for the vast majority of Antminer, Whatsminer and Avalon power supplies sold for the European market.
Buy as a clean replacement for cords with damaged plugs, cut conductors or worn-out C13 ends — or stock in volume for site builds and EU-deployed mining fleets where the C13 socket is the standard PSU inlet.
Specifications
| Parameter | Value |
|---|---|
| Part type | AC power cord |
| Condition | New |
| Plug (mains end) | EU Schuko standard male plug |
| Connector (PSU end) | C13 female |
| Length | 1.5 meters |
| Conductor grade | 3x2.5mm² (heavy-duty) |
| Conductors | 3 (L + N + PE) |
| Weight | 0.3kg |
| Application | ASIC miner PSU mains input — EU market |
Compatibility
The C13 female end is compatible with any Antminer, Whatsminer or Avalon PSU that carries a C14 inlet — including most APW3 / APW7 / APW9-class supplies and the standard control-board inlets on smaller miners. For higher-current 16A platforms that use the larger C19/C20 form factor, see the C19 cord variants in related products.
Where the C13 EU cord fits
The Schuko plug seats into a standard EU mains outlet; the C13 female end mates with the C14 inlet on the PSU. The 3x2.5mm² conductors and 1.5m length keep voltage drop within acceptable limits at typical ASIC continuous loads while remaining flexible enough for tight rack runs.
Common failure symptoms on aging cords
- Discoloured or melted plastic at the plug or C13 connector
- Intermittent miner reboots traced to a flexed conductor break
- Cracked outer jacket exposing inner conductors
- Burn marks on the PSU C14 inlet from a poor C13 contact
- Plug pins bent or loose in the wall socket
Frequently asked questions
What's the difference between this cord and a C13 to UK plug?
This unit ships with a EU Schuko (Type F) plug for European mains outlets. For UK BS 1363 deployments, contact us for the UK-plug equivalent.
Will this work with C19 / C20 PSU inlets?
No — C19 / C20 inlets are larger and rated for higher current. See the C19 power cord listings in related products for those PSUs.
Is 3x2.5mm² enough for a 3000W+ miner?
The 3x2.5mm² conductor is sized for typical ASIC continuous loads on a 230V EU circuit. Always size your branch circuit, breaker and the supply cable to the miner's actual rated input — see specifications panel.
Is the cord new or recovered?
New stock — see condition row in the specifications table.
Related products
- P13 EU-Plug AC Power Cord for Antminer APW17 PSU
- C13 Splitter Power Cord 5ft Heavy-Duty for ASIC Antminer
- C13 US-Standard Heavy-Duty AC Power Cord for Antminer
- C13 to C14 Power Cord for Antminer / PDU Connection
- EU C19 Power Cord 16A 250V for Whatsminer / Crypto Miner
Contact contact@lys-sz.com for volume pricing or compatibility questions. Worldwide shipping from our Shenzhen warehouses. DDP available for US and EU customers.
Buying in bulk for a mining farm or repair shop?
Get dedicated B2B pricing on this part and across our full catalog — quote response within 24 hours, payment by T/T USD bank wire, and DDP delivery available for US & EU customers (and other lanes on request).
