ASIC Crypto Miner AC Power Cords

AC Power Cords for Crypto Miner PSUs — C13, C19, C20, P13, SA-30

The right AC power cord is the difference between a stable 24/7 mining setup and intermittent restarts that kill hashrate. This collection covers every certified power cord standard used by Bitmain, MicroBT, Avalon, Goldshell, Innosilicon and Iceriver power supplies — C13 (10A) for legacy and entry-level PSUs, C19 (16A) for modern high-power air-cooled units, P13 / P14 / P33 for Bitmain APW17 and APW11 hydro PSUs, SA-30 for Whatsminer P231B / P232B and hydro miners. With US, EU, UK, CN and CH plug variants in stock, ready for worldwide deployment.

Choose the right power cord for your miner

Match the cord to your PSU input socket and your local plug standard. Common combinations :

• Bitmain Antminer S19 / T19 (APW12) — C13 to local plug for low-power configurations, C19 to local plug for full-power 3 600W operation, C20 to C13 extension when running multiple miners on a PDU.
• Bitmain Antminer S21 / S19j XP / T21 (APW17) — P13 to local plug for direct PSU-to-wall, C20 to P13 for PDU connection, P13 to EU / UK / US plug variants.
• Bitmain Antminer hydro (APW11) — Premium hydro power cord designed for the APW11 PSU output, oil-resistant variants for immersion conversion.
• Whatsminer M30 / M50 / M60 series (P221B / P232B) — C19 16A 250V cord with local plug, SA2-30 cord for P231B / P232B (220-277V), C19 female to C20 male for PDU integration.
• Whatsminer M53 / M63 hydro — SA-30 single-head power cable, oil-resistant variants for cooling-fluid environments.
• Avalon, Goldshell, Innosilicon — C13 / C19 to local plug depending on PSU current rating, plus model-specific extension cables.

What's in this collection

Specific power cords stocked, organised by use case :

• C13 power cords — C13 to C14 extension, AC C13 extension to C20 for PDU integration, C13 to local plug (US / EU / UK / CN).
• C19 16A power cords — Whatsminer C19 to EU plug 16A 250V 3×2.5mm, AC C19 to C20 PDU connection 1.5m 14AWG 250V, Whatsminer C19 female to C20 male.
• Bitmain P13 / C20 to local plug — Antminer S21 P13 to EU / UK / US plug for APW17 PSU, C20 to P13 power cord for S21 / S19j XP to PDU, single P33 plug cord for T21 / S21 air-cooled.
• Whatsminer SA-30 hydro cords — High-performance hydro single-head cable with plug, SA2-30 for P231B / P232B at 220-277V, plug type US / EU / CN / UK / C20.
• Oil-resistant immersion cords — Antminer S21 immersion SJ00W certified 1.5m oil-resistant US-certified power cord, S21 XP immersion oil-resistant 2.5m, designed for oil and dielectric fluid environments without degradation.

Why source power cords from LYS Shenzhen

Three reasons mining farms and repair shops standardise on our power cords :

• Certified amperage — every cord is rated and labelled to its current capacity (10A / 13A / 16A / 30A) and voltage (125V / 250V / 277V). High-power hydro cords are stress-tested to the actual continuous-load rating, not nameplate-only.
• Multi-region plug stock — same SKU available with US, EU, UK, CN and CH plugs. One supplier for global mining fleet deployments.
• Worldwide shipping with DDP option for US and EU customers — full landed cost upfront, no surprise customs at delivery.

Frequently asked questions

How do I know whether my miner needs a C13 or C19 cord ?
Look at the PSU input socket : C13 sockets are smaller (rated 10A), C19 are larger (rated 16A). Modern high-power PSUs (Bitmain APW12 / APW17, Whatsminer P221B / P232B, Avalon 3300W) all use C19. Older legacy PSUs (APW3 / APW7, small home miners) use C13.

Can I run a 16A miner on a 10A C13 cord ?
No — that's a fire risk. Always match the cord rating to the PSU current draw. A 3 600W miner at 240V draws ~15A, so requires a C19 16A cord. Using a C13 10A cord on a high-power miner will overheat the connector and the cable.

Do you stock cords with PDU C20 plugs for rack-mount setups ?
Yes. C20-male to C19-female and C20-to-P13 cords are stocked specifically for PDU-to-miner connections in rack-mount mining farms.

What's special about oil-resistant immersion cords ?
Immersion cooling fluids degrade standard rubber and PVC cable insulation over time. Oil-resistant cords use SJ00W or equivalent certified jacket material that resists the cooling fluid without cracking or contaminating the bath. Required for any miner running in immersion.

Get a custom quote for bulk power cords

For mining farms standardising plug regions across multi-site deployments, or repair shops keeping fleet-spec inventory, our bulk pricing on power cords reflects volume orders. Send your typical reorder list and we'll quote back with volume options.

Get Business Pricing →