Crypto Miner Repair Tools and Instruments

Crypto Miner Repair Tools and Instruments — Soldering, Rework, Diagnostics, Stencils

Hashboard repair, PSU rework, and control board troubleshooting demand a specific tool stack that general electronics shops don't always carry. This collection covers every hands-on repair tool we stock for crypto miner service — soldering irons, hot air rework stations, IR preheating plates, ESD-safe tweezers, anti-static workstations, dust-cleaning turbo fans, oscilloscope probes, thermal paste stencils, and precision tooling for component-level work across Antminer, Whatsminer, Avalon, Iceriver and Innosilicon hardware. Built for repair shops processing boards at volume and for in-house mining-farm service teams.

What you need by repair operation — browse by sub-category

Repair work on ASIC miners falls into 4 tool categories, each with its own dedicated collection :

• Hashboard Test Fixtures → — universal multi-brand fixtures (K8 universal ASIC hashboard & PSU tester for repair labs, K9 ASIC multifunctional hashboard & PSU diagnostic tool) plus brand-dedicated fixtures (Antminer BM1368 for S21 / T21, Whatsminer KF1930 for M30 series, M50 / M60 series test fixture, Avalon A320x multifunction with LCD, Innosilicon Aladdin T1 / T2T / T3 / L2, Goldshell HS5 / CK5 / KD5 / LT5, Iceriver KS series). Identify failed chips before rework.
• ASIC Chip Tin Tools → — laser-cut stencils, fixture plates, and thermal paste molds for chip-level reflow on Antminer (BM1387, BM1393, BM1396, BM1397, BM1398, BM1362, BM1366, BM1368), Whatsminer (KF1930 M30 series), Avalon and other generations.
• Thermal Paste & Cooling Materials (TIMs) → — DOWSIL TC-3080 8W/mK blue thermal gel (1kg), Whatsminer official silicone thermal strips (100m roll), HY-series thermal greases and putties for hashboard chip rework.
• Testing and Repair Instruments → — Sunshine DT-19N digital multimeter, P6100 oscilloscope probe, smart SMD test tweezers, Sunshine SL-936D soldering iron, IR T-8280 preheating plate, ESD-safe tweezers and supporting precision tooling.

What this collection covers in detail

If you want a one-stop view of the complete repair tool inventory, the products below span all four sub-categories above :

• Soldering and rework — Sunshine SL-936D intelligent control anti-static electric soldering iron, IR PCB preheating plate T-8280 infrared station for hashboard repair, hot air guns for chip-level rework.
• Diagnostic and test instruments — Sunshine DT-19N fully automated autorange digital multimeter, P6100 oscilloscope probe 100MHz x1/x10 BNC for waveform debugging, handheld smart SMD test tweezers for auto-detection of resistors / capacitors / diodes during board triage.
• Hashboard test fixtures — K8 universal ASIC hashboard and PSU tester for repair labs (cross-brand workflow), K9 ASIC multifunctional hashboard and PSU diagnostic tool, BM1368 series ASIC chip tester for Antminer S21 / T21, Whatsminer M30 / M50 / M60 series test fixtures, KF1920 / KF1921 / KF1930 fixtures, Avalon A320x multifunction with LCD, Innosilicon Aladdin T1 / T2T / T3 / L2 scanning kits, Goldshell HS5 / CK5 / KD5 / LT5 fixtures, Iceriver KS hashboard tester.
• Thermal paste stencils and molds — Whatsminer KF1930 stencil plate for M30 series hashboards, Whatsminer official silicone thermal strips 100m roll, BM1368pa / BM1368pb stencil plate for S21 / T21 hydro hashboard (single ASIC stencil and 4-in-1 ASIC stencil variants), DOWSIL TC-3080 8W/mK blue thermal gel 1kg for ASIC miner hashboards.
• Cleaning and handling tools — F8 mini turbo fan 130 000 RPM for dust cleaning with adjustable speeds, ESD safe anti-static anti-magnetic tweezers (6-piece set), high-temperature resistant pad 350×250mm 500°C for hot-work surface protection, ST anti-magnetic stainless steel tweezers.

What's in this collection

159+ repair tools and instruments organised by use case :

• Soldering stations and irons — Sunshine SL-936D anti-static electric soldering iron, complementary tip sets, solder paste for SMD work, flux pens for chip rework.
• Rework and reflow equipment — IR T-8280 infrared preheating station for hashboard reflow, hot air rework stations for ASIC chip replacement.
• Test and measurement — Sunshine DT-19N digital multimeter for voltage / current / continuity, P6100 100MHz oscilloscope probe for waveform analysis, smart SMD test tweezers for in-circuit component diagnostics.
• PSU test fixtures — Antminer APW12 PSU test fixture for Bitmain APW12-1215 power supply repair, dedicated PSU test fixtures for batch diagnostics.
• Hashboard stencils and thermal materials — BM1368pa / BM1368pb ASIC stencils for Antminer S21 / T21 hydro (single and 4-in-1 variants), Whatsminer KF1930 M30 series stencil plate, DOWSIL TC-3080 8W/mK blue thermal gel, Whatsminer official silicone thermal strips 100m roll.
• Handling and ESD safety — ESD anti-static anti-magnetic tweezers (6-piece sets), ST anti-magnetic stainless steel tweezers, high-temperature resistant work pads.
• Cleaning — F8 mini turbo fan 130 000 RPM for dust removal in repair workflow.

Why source repair tools from LYS Shenzhen

Three reasons hashboard repair shops standardise on our tool inventory :

• Repair-grade tooling — every soldering station, multimeter and oscilloscope probe stocked is the tier that repair shops actually use day-to-day. Not consumer-grade hobbyist tools that fail under fleet-scale repair volume.
• Bulk pricing on consumables — stencils, thermal pads, tweezers and other consumables benefit from volume orders. Quote-based pricing for shops processing 50+ boards / month.
• Worldwide shipping with DDP option for US and EU customers — small tooling ships fast, all-in landed cost quoted upfront.

Frequently asked questions

Do I need a full IR preheating station to replace a single ASIC chip, or can I do it with a hot air gun ?
Hot air gun works for single-chip replacement on smaller hashboards but you risk warping the PCB and damaging adjacent components. For batch repair (more than 5 boards / month) the IR preheating station (T-8280 or equivalent) pays for itself in board recovery rate and chip yield.

What thermal paste should I use after replacing a hashboard chip ?
For Antminer S19 / S21 air-cooled hashboards, DOWSIL TC-3080 8W/mK blue thermal gel is the OEM-grade compound. For Whatsminer M30 / M50 hashboards, the official Whatsminer silicone thermal strips (100m roll) are stocked. Generic high-conductivity paste (5-8W/mK) works for short-run repair but lacks the long-term consistency of OEM-grade.

Can I use a regular ESD wrist strap, or do I need anti-magnetic tweezers ?
ESD wrist strap protects against static discharge during board handling. Anti-magnetic tweezers are required when handling sensitive ICs near the hashboard inductors — regular steel tweezers can magnetise and cause measurement errors on the ICs they touch. Both are stocked in this collection.

What's the lead time on bulk repair tool orders ?
Common consumables (tweezers, thermal pads, stencils) typically dispatch within a few business days. Larger equipment orders (soldering stations, oscilloscope probes, IR preheaters) requiring specific stock or new sourcing are quoted with a specific timeline when we send the offer.

Do you supply training material on hashboard repair, or only the tools ?
We supply tools only. For training, we can point you to community resources and repair guides published by major hashboard repair operators. Our team can answer specific tool-related questions on request.

Get a custom quote for bulk repair tools and instruments

For hashboard repair shops scaling their tool inventory or mining-farm in-house service teams equipping a new bench, our quote-based volume pricing reflects scale. Send your typical tool list and we'll quote back with options including matched lot pricing on stencils, thermal materials, and high-volume consumables.

Get Business Pricing →