Cables, Power Cords and Connectors for Crypto Miners — Complete Selection

Cables and power cords are the most overlooked source of mining downtime — a degraded C13 plug, a loose 6-pin PSU cable, or a brittle 18-pin data ribbon can cost more lost hashrate per year than any single hashboard failure. This collection brings together every cable, power cord, and connector type we stock for crypto mining hardware — from C13 / C19 / P13 AC power cords that link your PSU to the PDU, to 14-pin and 22-pin data ribbons between control board and hashboard, plus individual replacement plugs and sockets for component-level repair.

Three categories, three different products

Cables for crypto miners fall into three distinct groups. Buyers regularly confuse them when ordering — here's how they differ :

• AC Power Cords — complete cables with plug and socket at each end, used to bring AC power from the PDU or wall socket to the PSU input. Standard C13, C19, C20, P13 (Bitmain APW17), SA-30 (Whatsminer hydro), with US / EU / UK / CN plug variants. Browse AC power cords →
• Data cables and adapters — signal cables that carry low-voltage data between control board and hashboard, or between control board and fans. 14-pin, 16-pin, 18-pin and 22-pin ribbon cables, plus fan adapter cables (4-pin square to 4-pin linear), USB programming cables, and signal extension adapters. Browse data cables & adapters →
• Connectors and headers — individual plugs, sockets and contacts only (no cable attached), for repair work where you need to replace just the failing end of a cable or a damaged socket on a board. P14 socket for Antminer APW17, C19 16A socket for Whatsminer / Avalon PDUs, 2×7 (14-pin) curved needle socket for Innosilicon / Avalon, P33 6-pin plug for Antminer S21 / T21, and more. Browse connectors & headers →

Common cable failures and replacements

Three failure modes account for most cable-related miner issues : worn C13 / C19 plug contacts causing intermittent power drops on PSU input, brittle or oxidised ribbon cables causing hashboard X errors, and broken fan adapter cables after multiple disassembly cycles. All three are quick replacements once you have the right part on hand.

Why source cables and power cords from LYS Shenzhen

Every AC power cord we stock is certified to its rated amperage (10A, 13A, 15A, 16A or 30A depending on the type) and 250V / 277V where required for high-power hydro miners. Data cables are tested for continuity and shielding. Bulk pricing available for repair shops and mining farms — most cables and connectors are well-suited to volume orders. Worldwide shipping with DDP option for US and EU customers.

Frequently asked questions

I just need to replace a damaged plug — do I have to buy a whole new power cord ?
No. Our Connectors & Headers category sells individual plugs and sockets without the cable. You can splice the new plug onto your existing cable if you're comfortable with crimping or soldering, which is significantly cheaper for one-off repairs.

What's the difference between C13 and C19 power cords ?
C13 is the smaller 10A connector used on older PSUs (APW3, APW7, smaller home miners). C19 is the larger 16A connector used on modern high-power PSUs (APW12, APW17, Whatsminer P221B / P232B, Avalon 3300W). Always check your PSU input socket before ordering.

Get Business Pricing for bulk cable orders →